[openfabrics-ewg] IBED-RC3 Installation fails

[Amit Mehrotra (amehrotr)]

The MPI compilation procedure first compiles the MPI stack and then
subsequently compiles the test programs. It uses mpicc for the latter.
I suspect the problem might have occured either during the installation
of mpicc in /usr/local/ibed/mpi/gcc/mvapich-0.9.7-mlx2.1.0/bin/mpicc or
in setting the path to point to this script during the test program
compilation.   As the test programs are unifrom across both openMPI and
mvapich in IBED.
 
The complete logs would definately help.
 
-Amit

________________________________

From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Jeff Squyres
(jsquyres)
Sent: Wednesday, April 19, 2006 6:47 PM
To: openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 


It would be most helpful to see the full logs where the "mpicc : command
not found" error occurs.
 
Can you send those?
 
Thanks.



________________________________

	From: Sharma, Karun [mailto:ksharma at silverstorm.com] 
	Sent: Tuesday, April 18, 2006 11:54 AM
	To: Jeff Squyres (jsquyres); openfabrics-ewg at openib.org
	Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 
	
	
	The logs are the initial logs which were obtained before
disabling ipath driver. After disabling ipath, mpi starts giving problem
of "mpicc : command not found". I then excluded mpi from the install and
its working.
	 
	As Aviram mentioned that Suse9.3 is not in the support matrix,
so i now moved to redhat.
	 
	Thanks
	Karun
	 
	 

		-----Original Message-----
		From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org]On Behalf Of Jeff Squyres
(jsquyres)
		Sent: Tuesday, April 18, 2006 2:09 PM
		To: openfabrics-ewg at openib.org
		Subject: RE: [openfabrics-ewg] IBED-RC3 Installation
fails 
		
		
		mpicc is part of the MPI installation, not the OS.
MVAPICH is still the default MPI, so you should be getting MVAPICH's
mpicc (not Open MPI's mpicc).
		 
		I don't see this error in the logs that you sent,
however.  What was trying to build when this failed?
		 
		
		

________________________________

			From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
			Sent: Tuesday, April 18, 2006 10:45 AM
			To: Scott Weitzenkamp (sweitzen);
openfabrics-ewg at openib.org
			Subject: RE: [openfabrics-ewg] IBED-RC3
Installation fails 
			
			
			Hi Scott:
			 
			It works if I exclude ipath and mpi. For mpi, i
am getting an error "mpicc : command not found". mpicc is a part of OS
or  IBED install? I was assuming that it should be a part of openMPI.
			 
			Aviram:
			 
			
			I am following the readme file of IBED RC3,
which points me to following location
			https://docs.mellanox.com/dm/ibgold/ReadMe.html.
Here the release notes say that Suse9.3 is supported.
			 
			Please let me know the updated supported matrix.
			 
			Regards
			Karun
			 

				-----Original Message-----
				From: Scott Weitzenkamp (sweitzen)
[mailto:sweitzen at cisco.com]
				Sent: Tuesday, April 18, 2006 11:27 AM
				To: Sharma, Karun;
openfabrics-ewg at openib.org
				Subject: RE: [openfabrics-ewg] IBED-RC3
Installation fails 
				
				
				Does it work if you exclude the ipath
driver?
				 
				Scott Weitzenkamp
				SQA and Release Manager
				Cisco Systems


________________________________

				From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
				Sent: Tuesday, April 18, 2006 8:11 AM
				To: openfabrics-ewg at openib.org
				Subject: [openfabrics-ewg] IBED-RC3
Installation fails 
				
				

				Hi: 

				I am trying to install IBED-RC3 on a
64-bit Intel machine. The machine is loaded with Suse9.3
(2.6.11.4-20a-smp kernel version).

				I am getting following error 
	
##################################################### 
				ERROR: Failed executing
"/tmp/openib-1.0/build_rpm.sh --prefix /usr/local/ibed --build_root
/var/tmp/IBED --packages ib_ipath ib_ipoib ib_sdp ib_srp ib_verbs --
--with-dapl --with-libibat --with-libibcm --with-libibcommon
--with-libibmad --with-libibumad --with-libibverbs --with-libipathverbs
--with-libmthca --with-librdmacm --with-libsdp --with-mstflint
--with-openib-diags --with-opensm --with-perftest --with-srptools
--with-tvflash -kver 2.6.11.4-20a-smp --ksrc
/lib/modules/2.6.11.4-20a-smp/build "

				See log file: /tmp/IBED.31878.log 


				st73:~/IBED-1.0-rc3 # 
	
######################################################## 

				Attached are the 2 log files. Let me
know if any other info is required. 

				Thanks 
				Karun 

				<<make_kernel.log>> <<IBED.31878.log>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060419/a55e3205/attachment.html>