[openfabrics-ewg] IBED-RC3 Installation fails
Vladimir Sokolovsky
vlad at mellanox.co.il
Wed Apr 19 23:41:49 PDT 2006
Hi,
The problem is in the mpitests RPM spec file (on SuSE distributions):
%build macro deletes RPM_BUILD_ROOT before starting rpm build and
install process.
So, the temporary place with OpenIB stack and MPI was removed (by
default: /var/tmp/IBED/usr/local/ibed) together with mpicc compiler
(/var/tmp/IBED/usr/local/ibed/mpi/gcc/mvapich-0.9.7-mlx2.1.0/bin/mpicc).
This will be fixed (using %build macro will be avoided) for the
OFED-1.0- rc4.
Note:
IBED use the same build root to build all RPM packages in order to
enable build process in the temporary place without installing dependent
RPMs.
Regards,
Vladimir
Amit Mehrotra (amehrotr) wrote:
> The MPI compilation procedure first compiles the MPI stack and then
> subsequently compiles the test programs. It uses mpicc for the latter.
> I suspect the problem might have occured either during the
> installation of mpicc in
> /usr/local/ibed/mpi/gcc/mvapich-0.9.7-mlx2.1.0/bin/mpicc or in setting
> the path to point to this script during the test program
> compilation. As the test programs are unifrom across both openMPI
> and mvapich in IBED.
>
> The complete logs would definately help.
>
> -Amit
>
> ------------------------------------------------------------------------
> *From:* openfabrics-ewg-bounces at openib.org
> [mailto:openfabrics-ewg-bounces at openib.org] *On Behalf Of *Jeff
> Squyres (jsquyres)
> *Sent:* Wednesday, April 19, 2006 6:47 PM
> *To:* openfabrics-ewg at openib.org
> *Subject:* RE: [openfabrics-ewg] IBED-RC3 Installation fails
>
> It would be most helpful to see the full logs where the "mpicc :
> command not found" error occurs.
>
> Can you send those?
>
> Thanks.
>
> ------------------------------------------------------------------------
> *From:* Sharma, Karun [mailto:ksharma at silverstorm.com]
> *Sent:* Tuesday, April 18, 2006 11:54 AM
> *To:* Jeff Squyres (jsquyres); openfabrics-ewg at openib.org
> *Subject:* RE: [openfabrics-ewg] IBED-RC3 Installation fails
>
> The logs are the initial logs which were obtained before disabling
> ipath driver. After disabling ipath, mpi starts giving problem
> of "mpicc : command not found". I then excluded mpi from the
> install and its working.
>
> As Aviram mentioned that Suse9.3 is not in the support matrix, so
> i now moved to redhat.
>
> Thanks
> Karun
>
>
>
> -----Original Message-----
> *From:* openfabrics-ewg-bounces at openib.org
> [mailto:openfabrics-ewg-bounces at openib.org]*On Behalf Of *Jeff
> Squyres (jsquyres)
> *Sent:* Tuesday, April 18, 2006 2:09 PM
> *To:* openfabrics-ewg at openib.org
> *Subject:* RE: [openfabrics-ewg] IBED-RC3 Installation fails
>
> mpicc is part of the MPI installation, not the OS. MVAPICH is
> still the default MPI, so you should be getting MVAPICH's
> mpicc (not Open MPI's mpicc).
>
> I don't see this error in the logs that you sent, however.
> What was trying to build when this failed?
>
>
> ------------------------------------------------------------------------
> *From:* openfabrics-ewg-bounces at openib.org
> [mailto:openfabrics-ewg-bounces at openib.org] *On Behalf Of
> *Sharma, Karun
> *Sent:* Tuesday, April 18, 2006 10:45 AM
> *To:* Scott Weitzenkamp (sweitzen); openfabrics-ewg at openib.org
> *Subject:* RE: [openfabrics-ewg] IBED-RC3 Installation fails
>
> Hi Scott:
>
> It works if I exclude ipath and mpi. For mpi, i am getting
> an error "mpicc : command not found". mpicc is a part of
> OS or IBED install? I was assuming that it should be a
> part of openMPI.
>
> Aviram:
>
> I am following the readme file of IBED RC3, which points
> me to following location
> https://docs.mellanox.com/dm/ibgold/ReadMe.html. Here the
> release notes say that Suse9.3 is supported.
>
> Please let me know the updated supported matrix.
>
> Regards
> Karun
>
>
> -----Original Message-----
> *From:* Scott Weitzenkamp (sweitzen)
> [mailto:sweitzen at cisco.com]
> *Sent:* Tuesday, April 18, 2006 11:27 AM
> *To:* Sharma, Karun; openfabrics-ewg at openib.org
> *Subject:* RE: [openfabrics-ewg] IBED-RC3 Installation
> fails
>
> Does it work if you exclude the ipath driver?
>
> Scott Weitzenkamp
> SQA and Release Manager
> Cisco Systems
>
> ------------------------------------------------------------------------
> *From:* openfabrics-ewg-bounces at openib.org
> [mailto:openfabrics-ewg-bounces at openib.org] *On
> Behalf Of *Sharma, Karun
> *Sent:* Tuesday, April 18, 2006 8:11 AM
> *To:* openfabrics-ewg at openib.org
> *Subject:* [openfabrics-ewg] IBED-RC3 Installation
> fails
>
> Hi:
>
> I am trying to install IBED-RC3 on a 64-bit Intel
> machine. The machine is loaded with Suse9.3
> (2.6.11.4-20a-smp kernel version).
>
> I am getting following error
> #####################################################
> ERROR: Failed executing
> "/tmp/openib-1.0/build_rpm.sh --prefix
> /usr/local/ibed --build_root /var/tmp/IBED
> --packages ib_ipath ib_ipoib ib_sdp ib_srp
> ib_verbs -- --with-dapl --with-libibat
> --with-libibcm --with-libibcommon --with-libibmad
> --with-libibumad --with-libibverbs
> --with-libipathverbs --with-libmthca
> --with-librdmacm --with-libsdp --with-mstflint
> --with-openib-diags --with-opensm --with-perftest
> --with-srptools --with-tvflash -kver
> 2.6.11.4-20a-smp --ksrc
> /lib/modules/2.6.11.4-20a-smp/build "
>
> See log file: /tmp/IBED.31878.log
>
>
> st73:~/IBED-1.0-rc3 #
> ########################################################
>
>
> Attached are the 2 log files. Let me know if any
> other info is required.
>
> Thanks
> Karun
>
> <<make_kernel.log>> <<IBED.31878.log>>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> openfabrics-ewg mailing list
> openfabrics-ewg at openib.org
> http://openib.org/mailman/listinfo/openfabrics-ewg
>
More information about the ewg
mailing list