[openfabrics-ewg] OFED 1.1-RC7 build problem on SLES10

[Chris Dennett]

I've been trying to install OFED 1.1 RC7 on an x86 server with a fresh install 
of SLES10 (32-bit).  It errors out when trying to build the kernel modules.  
I've included what I think are the relevant log messages below.  I've tried 
installing everything (minus iser and tvflash) or just the modules needed for 
SRP.  I've installed 1.1 RC7 successfully on other RedHat servers without any 
problems.  I am installing as root.  Any help would be appreciated.

Thanks.

-Chris

==============================================
+ make kernel
Building kernel modules
Kernel version: 2.6.16.21-0.8-smp
Modules directory: //lib/modules/2.6.16.21-0.8-smp
Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build
env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include 
-I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
        -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \
        -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \
        make -C /lib/modules/2.6.16.21-0.8-smp/build 
SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband" 
KERNELRELEASE=2.6.16.21-0.8-smp \
        EXTRAVERSION=.21-0.8-smp V=1  \
        CONFIG_INFINIBAND=m \
        CONFIG_INFINIBAND_IPOIB=m \
        CONFIG_INFINIBAND_SDP= \
        CONFIG_INFINIBAND_SRP=m \
        CONFIG_INFINIBAND_USER_MAD=m \
        CONFIG_INFINIBAND_USER_ACCESS=m \
        CONFIG_INFINIBAND_ADDR_TRANS=y \
        CONFIG_INFINIBAND_MTHCA=m \
        CONFIG_INFINIBAND_IPOIB_DEBUG=y \
        CONFIG_INFINIBAND_ISER= \
        CONFIG_INFINIBAND_EHCA= \
        CONFIG_INFINIBAND_RDS= \
        CONFIG_INFINIBAND_RDS_DEBUG= \
        CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \
        CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \
        CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \
        CONFIG_INFINIBAND_SDP_DEBUG= \
        CONFIG_INFINIBAND_SDP_DEBUG_DATA= \
        CONFIG_INFINIBAND_IPATH= \
        CONFIG_INFINIBAND_MTHCA_DEBUG=y \
                CONFIG_INFINIBAND_MADEYE= \
        LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \
        -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
        -Iinclude \
        $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
        -include include/linux/autoconf.h \
        -include /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \
        ' \
        modules
make[1]: Entering directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
make[1]: *** No rule to make target `modules'.  Stop.
make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
make: *** [kernel] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install)


RPM build errors:
    user vlad does not exist - using root
    group mtl does not exist - using root
    user vlad does not exist - using root
    group mtl does not exist - using root
    Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
ERROR: Failed executing "rpmbuild --rebuild --define '_topdir 
/var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define 'build_root 
/var/tmp/OFED' --define 'configure_options --with-libibcommon --with-libibmad 
--with-libibumad --with-libibverbs --with-libmthca --with-opensm 
--with-librdmacm --with-openib-diags --with-srptools --with-mstflint 
--with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod 
--with-core-mod --with-user_mad-mod --with-user_access-mod 
--with-addr_trans-mod' --define 'configure_options32 %{nil}' --define 
'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC 
/lib/modules/2.6.16.21-0.8-smp/build' --define 'build_kernel_ib 1' --define 
'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR /etc/sysconfig/network' 
--define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define 
'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm"

===================================================

smx32:~ # uname -a
Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC 2006 i686 
i686 i386 GNU/Linux
smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
Module.symvers



-- 
Chris Dennett
Design Engineer
Texas Memory Systems, Inc.
713-266-3200 x430
Chris.Dennett at texmemsys.com