[ewg] issue with Send BW test on SLES10 64 -bit machine

[Choudhari, Trishal]

Send BW test is failing on SLES 10 64-bit machines.
Following is the output
 
 
SERVER SIDE
------------------------
 
ss23:~ # ib_send_bw
------------------------------------------------------------------
                    Send BW Test
Inline data is used up to 400 bytes message
Connection type : RC
  local address:  LID 0x02, QPN 0x2f0406, PSN 0xe2b95e
  remote address: LID 0x01, QPN 0x300406, PSN 0xb4b2a0
Mtu : 1024
------------------------------------------------------------------
 #bytes #iterations    BW peak[MB/sec]    BW average[MB/sec]
server read: Success
0/45: Couldn't read remote address
------------------------------------------------------------------
ss23:~ #

 
CLIENT SIDE
------------------------
 
ss22:~ # ib_send_bw 172.20.51.223
------------------------------------------------------------------
                    Send BW Test
Inline data is used up to 400 bytes message
Connection type : RC
  local address:  LID 0x01, QPN 0x300406, PSN 0xb4b2a0
  remote address: LID 0x02, QPN 0x2f0406, PSN 0xe2b95e
Mtu : 1024
------------------------------------------------------------------
 #bytes #iterations    BW peak[MB/sec]    BW average[MB/sec]
Completion wth error at client:
Failed status 12: wr_id 1 syndrom 0x81
scnt=600, ccnt=300
ss22:~ #

 
Please let me know if any one else is seeing the same issue or shall I go ahead and log a defect against this.
 
 
Trishal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20070326/96e050f9/attachment.html>