[ewg] OpenSM 3.3.16 will not start

[Hal Rosenstock]

Hi Mads,

On 4/12/2013 10:09 AM, Mads Boye wrote:
> Hi Hal.
> Yes, maybe i understood it incorrectly, but doesn't all nodes need the OpenSM running, in order for working IB?

To clarify, a subnet needs to have at least 1 SM running. It's best if
OpenSM runs on a small number of admin nodes which are always present.

-- Hal

> The PXE booting is happening over an admin ethernet.

> Mads Boye
> HPC & VMware Administrator  |  Information Service Technology
> 
> Phone: (+45) 9940 3453  | Email:mb at ist.aau.dk |  Webhomes.ist.aau.dk/mb/
> Aalborg University | Selma Lagerløfs Vej 300 - 4.2.46 | Aalborg East |
> 
> ________________________________________
> Fra: Hal Rosenstock [hal at dev.mellanox.co.il]
> Sendt: 12. april 2013 16:04
> Til: Mads Boye
> Cc: ewg at lists.openfabrics.org
> Emne: Re: [ewg] OpenSM 3.3.16 will not start
> 
> Hi again Mads,
> 
> On 4/12/2013 2:25 AM, Mads Boye wrote:
>> Our worker nodes PXE boots from an image on a local administration machine. OpenSM has been compiled and installed into this image directly
>> with no errors durring ./configure , make , or make install.
> 
> Are you saying that worker nodes run OpenSM ?
> 
> Is the PXE booting over IB (or some other network) ?
> 
> -- Hal
>