<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
<tt>Noticed I couldn't ifup ib0, so started tracing this down. I've
tried re-flashing and it doesn't help. I've also tried to find an
"A0" rev firmware, to no avail. What am I missing?<br>
thx-<br>
<br>
Jeremy<br>
<br>
<b>[root@acfs mellanox]# service openibd restart</b><br>
Unloading HCA driver: [ OK
]<br>
Loading HCA driver and Access Layer: [ OK
]<br>
Setting up InfiniBand network interfaces:<br>
Setting up service network . . . [
done ]<br>
<b>[root@acfs mellanox]# dmesg |tail -10<br>
</b>mlx4_core: Mellanox ConnectX core driver v1.0-ofed1.5.1 (April
4, 2008)<br>
mlx4_core: Initializing 0000:83:00.0<br>
mlx4_core 0000:83:00.0: PCI INT A -> GSI 52 (level, low) ->
IRQ 52<br>
mlx4_core 0000:83:00.0: setting latency timer to 64<br>
mlx4_core 0000:83:00.0: command 0xfff failed: fw status = 0x1<br>
mlx4_core 0000:83:00.0: MAP_FA command failed, aborting.<br>
mlx4_core 0000:83:00.0: Failed to start FW, aborting.<br>
mlx4_core 0000:83:00.0: PCI INT A disabled<br>
mlx4_core: probe of 0000:83:00.0 failed with error -5<br>
NET: Registered protocol family 27<br>
<b>[root@acfs mellanox]# lspci |grep -i mellanox<br>
</b>83:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX
VPI PCIe 2.0 5GT/s - IB QDR / 10GigE] (rev a0)<br>
<b>[root@acfs mellanox]# mstflint -d 83:00.0 q<br>
</b>Image type: ConnectX<br>
FW Version: 2.7.0<br>
Device ID: 26428<br>
Chip Revision: A0<br>
Description: Node Port1
Port2 Sys image<br>
GUIDs: 0002c9030003c01e 0002c9030003c01f
0002c9030003c020 0002c9030003c021 <br>
MACs: 000000000000
000000000001<br>
Board ID: (MT_0C40110009)<br>
VSD: <br>
PSID: MT_0C40110009<br>
<b>[root@acfs mellanox]# <br>
</b><br>
<br>
</tt>
</body>
</html>