scsi host4: ib_srp: new target: id_ext c19d350003c90200 ioc_guid 0002c90300359de0 pkey ffff service_id c19d350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9de1
scsi host4: ib_srp: REJ received
scsi host4:   REJ reason: stale connection
scsi host4: ib_srp: retrying stale connection
scsi host4: ib_srp: REJ received
scsi host4:   REJ reason: stale connection
scsi host4: ib_srp: retrying stale connection
scsi host4: ib_srp: REJ received
scsi host4:   REJ reason: stale connection
scsi host4: ib_srp: retrying stale connection
scsi host4: ib_srp: REJ received
scsi host4:   REJ reason: stale connection
scsi host4: ib_srp: giving up on stale connection
scsi host4: ib_srp: Connection failed
scsi host5: ib_srp: new target: id_ext c19d350003c90200 ioc_guid 0002c90300359de0 pkey ffff service_id c19d350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9de2
scsi host5: ib_srp: REJ received
scsi host5:   REJ reason: stale connection
scsi host5: ib_srp: retrying stale connection
scsi host5: ib_srp: REJ received
scsi host5:   REJ reason: stale connection
scsi host5: ib_srp: retrying stale connection
scsi host5: ib_srp: REJ received
scsi host5:   REJ reason: stale connection
scsi host5: ib_srp: retrying stale connection
scsi host5: ib_srp: REJ received
scsi host5:   REJ reason: stale connection
scsi host5: ib_srp: giving up on stale connection
scsi host5: ib_srp: Connection failed
scsi host6: ib_srp: new target: id_ext c09e350003c90200 ioc_guid 0002c90300359e10 pkey ffff service_id c09e350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9e11
scsi6 : SRP.T10:C09E350003C90200
scsi 6:0:0:0: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 6:0:0:0: [sdb] Unit Not Ready
sd 6:0:0:0: [sdb] Sense Key : Unit Attention [current] 
sd 6:0:0:0: [sdb] Add. Sense: Reported luns data has changed
sd 6:0:0:0: [sdb] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 6f 00 10 08
scsi 6:0:0:4: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 6:0:0:4: Attached scsi generic sg3 type 0
sd 6:0:0:4: [sdc] 2197815296 512-byte logical blocks: (1.12 TB/1.02 TiB)
 sdb:
sd 6:0:0:4: [sdc] Write Protect is off
sd 6:0:0:4: [sdc] Mode Sense: 6f 00 10 08
sd 6:0:0:4: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
 unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
 sdc: unknown partition table
sd 6:0:0:4: [sdc] Attached SCSI disk
scsi host7: ib_srp: new target: id_ext c09e350003c90200 ioc_guid 0002c90300359e10 pkey ffff service_id c09e350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9e12
scsi7 : SRP.T10:C09E350003C90200
scsi 7:0:0:0: RAID              DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
scsi 7:0:0:0: Attached scsi generic sg4 type 12
scsi 7:0:0:1: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 7:0:0:1: Attached scsi generic sg5 type 0
sd 7:0:0:1: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 7:0:0:1: [sdd] Unit Not Ready
sd 7:0:0:1: [sdd] Sense Key : Unit Attention [current] 
sd 7:0:0:1: [sdd] Add. Sense: Reported luns data has changed
sd 7:0:0:1: [sdd] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
sd 7:0:0:1: [sdd] Write Protect is off
sd 7:0:0:1: [sdd] Mode Sense: 6f 00 10 08
sd 7:0:0:1: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdd: unknown partition table
sd 7:0:0:1: [sdd] Attached SCSI disk
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 6:0:0:4: [sdc] Synchronizing SCSI cache
sd 6:0:0:4: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
scsi host6: ib_srp: connection closed
sd 7:0:0:1: [sdd] Synchronizing SCSI cache
sd 7:0:0:1: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
scsi host7: ib_srp: connection closed
scsi host8: ib_srp: new target: id_ext c19d350003c90200 ioc_guid 0002c90300359de0 pkey ffff service_id c19d350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9de1
scsi8 : SRP.T10:C19D350003C90200
scsi 8:0:0:0: RAID              DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg2 type 12
scsi 8:0:0:2: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 8:0:0:2: Attached scsi generic sg3 type 0
sd 8:0:0:2: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 8:0:0:2: [sdb] Unit Not Ready
sd 8:0:0:2: [sdb] Sense Key : Unit Attention [current] 
sd 8:0:0:2: [sdb] Add. Sense: Reported luns data has changed
sd 8:0:0:2: [sdb] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
sd 8:0:0:2: [sdb] Write Protect is off
sd 8:0:0:2: [sdb] Mode Sense: 6f 00 10 08
sd 8:0:0:2: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdb: unknown partition table
sd 8:0:0:2: [sdb] Attached SCSI disk
scsi host9: ib_srp: new target: id_ext c19d350003c90200 ioc_guid 0002c90300359de0 pkey ffff service_id c19d350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9de2
scsi9 : SRP.T10:C19D350003C90200
scsi 9:0:0:0: RAID              DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
scsi 9:0:0:0: Attached scsi generic sg4 type 12
scsi 9:0:0:3: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 9:0:0:3: Attached scsi generic sg5 type 0
sd 9:0:0:3: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 9:0:0:3: [sdc] Unit Not Ready
sd 9:0:0:3: [sdc] Sense Key : Unit Attention [current] 
sd 9:0:0:3: [sdc] Add. Sense: Reported luns data has changed
sd 9:0:0:3: [sdc] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
sd 9:0:0:3: [sdc] Write Protect is off
sd 9:0:0:3: [sdc] Mode Sense: 6f 00 10 08
sd 9:0:0:3: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdc: unknown partition table
sd 9:0:0:3: [sdc] Attached SCSI disk
scsi host10: ib_srp: new target: id_ext c09e350003c90200 ioc_guid 0002c90300359e10 pkey ffff service_id c09e350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9e11
scsi10 : SRP.T10:C09E350003C90200
scsi 10:0:0:0: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 10:0:0:0: [sdd] Unit Not Ready
sd 10:0:0:0: [sdd] Sense Key : Unit Attention [current] 
sd 10:0:0:0: [sdd] Add. Sense: Reported luns data has changed
sd 10:0:0:0: [sdd] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
scsi 10:0:0:4: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 10:0:0:0: [sdd] Write Protect is off
sd 10:0:0:0: [sdd] Mode Sense: 6f 00 10 08
sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 10:0:0:4: Attached scsi generic sg7 type 0
sd 10:0:0:4: [sde] 2197815296 512-byte logical blocks: (1.12 TB/1.02 TiB)
 sdd: unknown partition table
sd 10:0:0:4: [sde] Write Protect is off
sd 10:0:0:4: [sde] Mode Sense: 6f 00 10 08
sd 10:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 10:0:0:0: [sdd] Attached SCSI disk
 sde: unknown partition table
sd 10:0:0:4: [sde] Attached SCSI disk
scsi host11: ib_srp: new target: id_ext c09e350003c90200 ioc_guid 0002c90300359e10 pkey ffff service_id c09e350003c90200 dgid fe80:0000:0000:0000:0002:c903:0035:9e12
scsi11 : SRP.T10:C09E350003C90200
scsi 11:0:0:0: RAID              DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
scsi 11:0:0:0: Attached scsi generic sg8 type 12
scsi 11:0:0:1: Direct-Access     DDN      SFA 12000        1.50 PQ: 0 ANSI: 5
sd 11:0:0:1: Attached scsi generic sg9 type 0
sd 11:0:0:1: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
sd 11:0:0:1: [sdf] Unit Not Ready
sd 11:0:0:1: [sdf] Sense Key : Unit Attention [current] 
sd 11:0:0:1: [sdf] Add. Sense: Reported luns data has changed
sd 11:0:0:1: [sdf] 4412407808 512-byte logical blocks: (2.25 TB/2.05 TiB)
sd 11:0:0:1: [sdf] Write Protect is off
sd 11:0:0:1: [sdf] Mode Sense: 6f 00 10 08
sd 11:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdf: unknown partition table
sd 11:0:0:1: [sdf] Attached SCSI disk
sd 8:0:0:2: [sdb] Synchronizing SCSI cache
sd 8:0:0:2: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
scsi host8: ib_srp: connection closed
sd 9:0:0:3: [sdc] Synchronizing SCSI cache
sd 9:0:0:3: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
scsi host9: ib_srp: connection closed
sd 10:0:0:0: [sdd] Synchronizing SCSI cache
sd 10:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 10:0:0:4: [sde] Synchronizing SCSI cache
sd 10:0:0:4: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
usb 4-2: new low speed USB device using uhci_hcd and address 4
usb 4-2: New USB device found, idVendor=413c, idProduct=2003
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell USB Keyboard
usb 4-2: Manufacturer: Dell
usb 4-2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input7
generic-usb 0003:413C:2003.0005: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2/input0
scsi host10: ib_srp: connection closed
sd 11:0:0:1: [sdf] Synchronizing SCSI cache
sd 11:0:0:1: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
scsi host11: ib_srp: connection closed