[openib-general] vapi start error : mod_thh

[Neeraj Gupta]

Hi,

I am getting failure while starting VAPI.

[root at ibsys1 root]# vapi start
vapi:    Inspecting PCI chipset:                           [  OK  ]
vapi:    Loading mosal:                                    [  OK  ]
vapi:    Creating device node /dev/mosal:                  [  OK  ]
vapi:    Loading mod_mpga:                                 [  OK  ]
vapi:    Loading mod_vapi_common:                          [  OK  ]
vapi:    Loading mod_hh:                                   [  OK  ]
vapi:    Loading mod_thh:                                  [FAILED]

I tried many times.. burnt firmware again... reloaded software but no luck.
Interesting thing is that the same error I got on another machine and it 
went away after a couple of reboots but not on this one. I am not sure 
what made the other machine work !

Some system info :
[root at ibsys1 root]# uname -a
Linux ibsys1 2.4.21-4.ELsmp #1 SMP Fri Oct 3 17:52:56 EDT 2003 i686 i686 
i386 GNU/Linux

[root at ibsys1 root]# cat /etc/redhat-release
Red Hat Enterprise Linux AS release 3 (Taroon)

[root at ibsys1 root]# lsmod
Module                  Size  Used by    Not tainted
mod_hh                 16632   0
mod_vapi_common        64360   0
mod_mpga               24960   0  (unused)
mosal                 113300   0  [mod_vapi_common mod_mpga]
mst_pciconf            79104   0
mst_pci                77248   0
mst_info                3448   0
nfs                    96912   1  (autoclean)
lockd                  60656   1  (autoclean) [nfs]
sunrpc                 92124   1  (autoclean) [nfs lockd]
lp                      9220   0  (autoclean)
parport                39072   0  (autoclean) [lp]
autofs                 13780   0  (autoclean) (unused)
e1000                  72320   1
floppy                 59056   0  (autoclean)
microcode               5248   0  (autoclean)
keybdev                 2976   0  (unused)
mousedev                5688   1
hid                    22404   0  (unused)
input                   6208   0  [keybdev mousedev hid]
usb-uhci               27532   0  (unused)
usbcore                83168   1  [hid usb-uhci]
ext3                   95784   1
jbd                    56856   1  [ext3]
aic79xx               190652   2
sd_mod                 13744   4
scsi_mod              116904   2  [aic79xx sd_mod]


If someone can help me here, I will appreciate.

Thanks,
-- 
*******************************************************************
* Neeraj Gupta                   email: neeraj.gupta at sun.com
* Netra Systems & Networking     phone: +1(510)936-4852 or x14852
* Sun Microsystems, Inc.         fax  : +1(510)936-4963
* 7788 Gateway Blvd, UNWK19-202, Newark, CA 94560, USA
*******************************************************************