[openib-general] AIO SDP and ttcp.aio: Event errors

[Wooding Steve]

Hi,

I have been putting ttcp.aio through its paces and have a few questions.

1. When -l is larger than 131072 I get an Event error <-22> on the transmit
side and no data to transferred. Changing values of -n and -a do not make
any difference.

2. When using a value of 1 for -a (so I suppose this is non-aio), I get an
Event error of <-32> on the transmit side and an <-104> on the receiver end.
Only some of the data is transferred.

3. For future reference, where can I find out what these Event error codes
mean to give me a glue of what's going wrong.

4. I sometimes see significant differences in the transfer speed reported on
the transmit and receiver ends. Is one more right than the other?

My system details are:
Two nodes with Dual Xeon 64-bit processors
HCA: MT25208 (in MT23108 compat mode) with 128MB of ram
OS: RHEL 4 (64-bit)
Gen2 stack version: trunk of 2113 (subversion revision number)

Thanks,

Steve.

The Information contained in this E-Mail and any subsequent correspondence
is private and is intended solely for the intended recipient(s).
For those other than the recipient any disclosure, copying, distribution,
or any action taken or omitted to be taken in reliance on such information
is prohibited and may be unlawful.

Emails and other electronic communication with QinetiQ may be monitored.
Calls to QinetiQ may be recorded for quality control,
regulatory and monitoring purposes.