[openib-general] Flash sector size? eh?

[Grant Grundler]

Hi,
I'm wondering if anyone has a clue what this is about:

# ./mstflint/mstflint -d /proc/bus/pci/0084\:05/00.0 -i /root/fw-25208-4_7_400-MHGA28-1T.bin -s b
Flash sector size(0x10000) differs from sector size defined in image (0x20000)
# 

Did I grab the wrong firmware image?
http://www.mellanox.com/support/firmware_download.php


The HCA is :
0084:05:00.0 InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode) (rev a0)
	Subsystem: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode)
	Flags: bus master, fast devsel, latency 0, IRQ 58
	Memory at 00000f2888800000 (64-bit, non-prefetchable) [size=1M]
	Memory at 00000f2888000000 (64-bit, prefetchable) [size=8M]
	Memory at 00000f2880000000 (64-bit, prefetchable) [size=128M]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data
	Capabilities: [90] Message Signalled Interrupts: 64bit+ Queue=0/5 Enable-
	Capabilities: [60] #10 [0001]


This is running a recent svn openib bits (less than 2 weeks old)
on 2.6.14 kernel.

I'm messing with firmware because when loading mthca driver, I get:
...
GSI 65 (level, low) -> CPU 1 (0x0808) vector 58 unregistered
ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005)
ib_mthca: Initializing 0084:05:00.0
GSI 65 (level, low) -> CPU 0 (0x0008) vector 58
ACPI: PCI Interrupt 0084:05:00.0[A] -> GSI 65 (level, low) -> IRQ 58
ib_mthca 0084:05:00.0: HCA FW version 4.5.0 is old (4.7.0 is current).
ib_mthca 0084:05:00.0: If you have problems, try updating your HCA FW.

And I like that kind of warning.

thanks,
grant