[openib-general] Creating .bin files from .mlx

[Michael S. Tsirkin]

Hello!
Quoting r. Tom Duffy (tduffy at sun.com) "Re: [openib-general] Creating .bin files from .mlx":
> On Wed, 2005-01-05 at 09:06 +0200, Michael S. Tsirkin wrote:
> > What system is that? Linux, right?
> > Let me know, I'll try to reproduce.
> 
> Fedora Core 3 x86_64.

Hmm dont have it. I'll try to find such a pc.

> > Could you cat /proc/bus/pci/devices please?
> 

Looks good.

> > As a work around, could you please try ./mstflint -d
> /proc/bus/pci/06/00.0 ?
> 
> OK, that worked better:
> 
> [root at flopteron2 ~]# ./mstflint -d /proc/bus/pci/06/00.0 q
> Image type: FailSafe
> Chip rev.:  A0
> GUIDs:      0002c9010a99e030 0002c9010a99e031 0002c9010a99e032
> 0002c9000100d050
> 
> Board ID:
> 
> -tduffy

So flash access works and you' shall be able to burn over /proc/bus/pci.
But why not the devices file parsing?

Could you please re-run with the latest code from
gen2/userspace/mstflint?
I added a bunch of debug prints around that error messages you've seen.

MST