[openib-general] imgen mic messages

Hal Rosenstock halr at voltaire.com
Tue Sep 13 13:43:53 PDT 2005


On Tue, 2005-09-13 at 16:34, James Lentini wrote:
> These are expected. 

The warnings you documented appear different:
NOTE: The following warning can be ignored: 
-W- Parameter FW.tpt.scratchpad.pciex.endpoint_mask.pci_cfg_space.cfg_hdr.reg12.exp_rom_en already assigned in Perl. Old = 0x0; new = 0x0 
-W- Parameter FW.tpt.scratchpad.pciex.endpoint_mask.pci_cfg_space.cfg_hdr.reg12.addr_31_11 already assigned in Perl. Old = 0x0; new = 0x0 
-W- Parameter FW.tpt.scratchpad.pciex.endpoint_mask.pci_cfg_space.cfg_hdr.reg12.exp_rom_en already assigned in/mswg/release/fw-25208/fw-25208-rel-4_7_0-rc24/lion_cub_128.brd. Old = 0x0; new = 0x0 
-W- Parameter FW.tpt.scratchpad.pciex.endpoint_mask.pci_cfg_space.cfg_hdr.reg12.addr_31_11 already assigned in /mswg/release/fw-25208/fw-25208-rel-4_7_0-rc24/lion_cub_128.brd. Old = 0x0; new = 0x0

> I documented the procedure I used to flash my cards in the 
> installation cheat sheet:
> 
> https://openib.org/tiki/tiki-index.php?page=Installation+Cheat+Sheet

Thanks.

-- Hal
> 
> james
> 
> On Tue, 13 Sep 2005, Hal Rosenstock wrote:
> 
> > Hi Michael,
> > 
> > I got the following running mic:
> > mic -dev_type MT23108 -fw fw-23108-a1-rel.mic -conf MHXL-CF128-T.brd -format BINARY -wrimage fw-23108-a1-rel.bin
> > -W- Trying to assign float value (330357.142857143) to an integer parameter (dram_frequency_2x_khz). Fraction truncated.
> > -W- Parameter "FW.b2.AutoRename.258" fw-23108-a1-rel.mic:2146 initializes same CR-SPACE location (0x20a0a.0) as parameter "FW.b2.AutoRename.257" fw-23108-a1-rel.mic:2145
> > -W- Parameter "FW.b2.AutoRename.804" fw-23108-a1-rel.mic:2826 initializes same CR-SPACE location (0x3cc15.0) as parameter "FW.pcu debug out posted enable" fw-23108-a1-rel.mic:2761
> > -W- Parameter "FW.b2.AutoRename.805" fw-23108-a1-rel.mic:2827 initializes same CR-SPACE location (0x3cc15.1) as parameter "FW.pcu debug out nonposted enable" fw-23108-a1-rel.mic:2762
> > -W- Parameter "FW.b2.AutoRename.811" fw-23108-a1-rel.mic:2839 initializes same CR-SPACE location (0x3d690.22) as parameter "FW.DMUrx1d" fw-23108-a1-rel.mic:2757
> > 
> > They all appear to be warnings rather than errors.
> > 
> > Is this OK to burn ?
> > 
> > -- Hal
> > 
> > _______________________________________________
> > openib-general mailing list
> > openib-general at openib.org
> > http://openib.org/mailman/listinfo/openib-general
> > 
> > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
> > 




More information about the general mailing list