[openib-general] [PATCH][uDAPL] use IBAT ATS

[James Lentini]

Hi Arlin,

I'd like to checkin the following patch (also attached) to uDAPL. 
Please let me know if you see any issues.

james

Index: dapl/openib/dapl_ib_cm.c
===================================================================
--- dapl/openib/dapl_ib_cm.c	(revision 3408)
+++ dapl/openib/dapl_ib_cm.c	(working copy)
@@ -207,7 +207,8 @@ static void dapli_rt_comp_handler(uint64
 		}
 
 		status = ib_at_route_by_ip(((struct sockaddr_in *)&conn->r_addr)->sin_addr.s_addr,
-					   0, 0, 0, &conn->dapl_rt, 
+					   0, 0, IB_AT_ROUTE_FORCE_ATS, 
+					   &conn->dapl_rt, 
 					   &conn->dapl_comp,&conn->dapl_comp.req_id);
 		if (status < 0) {
 			dapl_dbg_log(DAPL_DBG_TYPE_ERR, "dapl_rt_comp_handler: "
@@ -607,7 +608,8 @@ dapls_ib_connect (
 	status = ib_at_route_by_ip(
 		((struct sockaddr_in *)&conn->r_addr)->sin_addr.s_addr, 
 		((struct sockaddr_in *)&conn->hca->hca_address)->sin_addr.s_addr, 
-		0, 0, &conn->dapl_rt, &conn->dapl_comp, &conn->dapl_comp.req_id);
+		0, IB_AT_ROUTE_FORCE_ATS, &conn->dapl_rt, &conn->dapl_comp, 
+		&conn->dapl_comp.req_id);
 
 	dapl_dbg_log(DAPL_DBG_TYPE_CM, " connect: at_route ret=%d,%s req_id %d GID %016llx %016llx\n", 
 		     status, strerror(errno), conn->dapl_comp.req_id,
-------------- next part --------------
Index: dapl/openib/dapl_ib_cm.c
===================================================================
--- dapl/openib/dapl_ib_cm.c	(revision 3408)
+++ dapl/openib/dapl_ib_cm.c	(working copy)
@@ -207,7 +207,8 @@ static void dapli_rt_comp_handler(uint64
 		}
 
 		status = ib_at_route_by_ip(((struct sockaddr_in *)&conn->r_addr)->sin_addr.s_addr,
-					   0, 0, 0, &conn->dapl_rt, 
+					   0, 0, IB_AT_ROUTE_FORCE_ATS, 
+					   &conn->dapl_rt, 
 					   &conn->dapl_comp,&conn->dapl_comp.req_id);
 		if (status < 0) {
 			dapl_dbg_log(DAPL_DBG_TYPE_ERR, "dapl_rt_comp_handler: "
@@ -607,7 +608,8 @@ dapls_ib_connect (
 	status = ib_at_route_by_ip(
 		((struct sockaddr_in *)&conn->r_addr)->sin_addr.s_addr, 
 		((struct sockaddr_in *)&conn->hca->hca_address)->sin_addr.s_addr, 
-		0, 0, &conn->dapl_rt, &conn->dapl_comp, &conn->dapl_comp.req_id);
+		0, IB_AT_ROUTE_FORCE_ATS, &conn->dapl_rt, &conn->dapl_comp, 
+		&conn->dapl_comp.req_id);
 
 	dapl_dbg_log(DAPL_DBG_TYPE_CM, " connect: at_route ret=%d,%s req_id %d GID %016llx %016llx\n", 
 		     status, strerror(errno), conn->dapl_comp.req_id,