[openib-general] Another opensm problem ?

[Roel van der Goot]

> Hal,

Hi Viswanath,

> - After 7-8 iterations, I ran into a weird problem, where opensm was showing
> the HCA as UNKNOWN. The port
> never came up to ACTIVE state. The unplugged and replugged into different
> slots, the port remained in INIT
> state.

Are you by any chance running with an Anafa based switch? You will
have to upgrade its firmware to 5.3.0. That caused this problem to
go away for me.

Cheers :-),
Roel.