[openib-general] how to execute the dtest?

[Steve Wise]

Here is what works for me (using mthca):

vic17:~ # cat /etc/dat.conf
OpenIB-cma-ip u1.2 nonthreadsafe default /usr/local/lib/libdapl.so mv_dapl.1.2 "192.168.79.147 0" ""
vic17:~ #

And ib1 has the above ip address:

vic17:~ # ifconfig ib1
ib1       Link encap:UNSPEC  HWaddr 00-00-04-05-FE-80-00-00-00-00-00-00-00-00-00-00
          inet addr:192.168.79.147  Bcast:192.168.79.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:2044  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:128
          RX bytes:840 (840.0 b)  TX bytes:896 (896.0 b)

My other system looks similar but the ipaddr is 192.168.79.148.

Hope this helps.

Steve.


On Wed, 2006-04-05 at 18:18 +0300, Dotan Barak wrote:
> Hi.
>  
> We would like to start executing the dtest.
> When i tried to execute it, i got the following output:
>  
> DAT Registry: Started (dat_init)
> DAT Registry: static registry file </etc/dat.conf>
>  
> DAT Registry: token
>  type  eor
>  value <>
>  
> 
> DAT Registry: token
>  type  string
>  value <IB1>
>  
> 
> DAT Registry: token
>  type  string
>  value <u1.2>
>  
> 
> DAT Registry: token
>  type  string
>  value <nonthreadsafe>
>  
> 
> DAT Registry: token
>  type  string
>  value <default>
>  
> 
> DAT Registry: token
>  type  string
>  value </usr/local/lib>
>  
> 
> DAT Registry: token
>  type  eor
>  value <>
>  
> 
> DAT Registry: token
>  type  eof
>  value <>
>  
> 9402 Running as server
> DAT Registry: dat_ia_openv (OpenIB-cma-ip,1:2,0) called
> DAT Registry: dat_ia_open () provider information for IA name
> OpenIB-cma-ip not found in dynamic registry
> 9402: Error Adaptor open: DAT_PROVIDER_NOT_FOUND
> DAT_NAME_NOT_REGISTERED
> DAT Registry: Stopped (dat_fini)
> 
>  
>  
>  
>  
> here is the content of the file /etc/dat.conf:
>  
>  
>  
> #
> # DAT 1.1 and 1.2 configuration file
> #
> # Each entry should have the following fields:
> #
> # <ia_name> <api_version> <threadsafety> <default> <lib_path> \
> #           <provider_version> <ia_params> <platform_params>
> #
> # Example for openib using the first Mellanox adapter,  port 1 and
> port 2
>  
> IB1 u1.2 nonthreadsafe default /usr/local/lib
> 
>  
> can someone tell me what am i doing wrong?
>  
> thanx
> Dotan Barak
> 
> Software Verification Engineer
> Mellanox Technologies
> Tel: +972-4-9097200 Ext: 231 Fax: +972-4-9593245
> P.O. Box 86 Yokneam 20692 ISRAEL.
> Home: +972-77-8841095 Cell: 052-4222383
>  
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
> 
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general