[openib-general] iSER Source and target code

[Mohit Katiyar, Noida]

Hi all,

 I was looking at iSER initiator and target code. I noticed that iSER
target code available is based on Datamover architecture but the
initiator code is not based on Datamover Architecture. Why the iSER
initiator code is not based on Datamover Architecture? What are the
future plans for the iSER target driver code?

With which iSCSI interface the iSER target driver code will be used?

 

Thanks in advance

 

Thanks and Regards

Mohit Katiyar

Lead Engineer

TLS, HCL Noida

 

"To dare is to lose one's footing momentarily. To not dare is to lose
oneself."

 



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. 
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. 
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20060801/efabc357/attachment.html>