[openib-general] SDP status?

[Eitan Zahavi]

Hi Ralph

I think that the error reported: IB_SA_MAD_STATUS_INSUF_COMPS means that
for some reason the SA on the switch requires some more bits component
mask for PathRecord query (component mask bits flag the SA by which
fields it should filter paths). This might as well be the cause for SDP
fail to get PathRecord response.

My only advice would be to contact the SA vendor you use and figure out
from the SM logs what is going on. 

Eitan Zahavi

> -----Original Message-----
> From: Ralph Campbell [mailto:ralphc at pathscale.com]
> Sent: Tuesday, January 17, 2006 1:09 AM
> To: Eitan Zahavi
> Cc: openib-general at openib.org
> Subject: RE: [openib-general] SDP status?
> 
> I guess our switch software needs updating :-(
> 
> # osmtest -f c
> 
> Command Line Arguments
> Done with args
>         Flow = Create Inventory
> using default guid 0x1175000004e007
> Jan 16 15:03:29 218782 [AABCC280] -> osm_vendor_bind: Binding to port
> 0x1175000004e007.
> Jan 16 15:03:29 231748 [AABCC280] ->
osmtest_validate_sa_class_port_info:
> -----------------------------
> SA Class Port Info:
>  base_ver:1
>  class_ver:2
>  cap_mask:0x2
>  resp_time_val:0x11000000
> -----------------------------
> Jan 16 15:03:29 245098 [41001960] -> __osmv_sa_mad_rcv_cb: ERR 5501:
Remote
> error:0x0006
> Jan 16 15:03:29 245124 [41001960] -> osmtest_query_res_cb: ERR 0003:
Error on query
> (IB_REMOTE_ERROR).
> Jan 16 15:03:29 245150 [AABCC280] -> osmtest_get_all_recs: ERR 0064:
ib_query failed
> (IB_REMOTE_ERROR).
> Jan 16 15:03:29 245163 [AABCC280] -> osmtest_get_all_recs: Remote
error =
> IB_SA_MAD_STATUS_INSUF_COMPS.
> Jan 16 15:03:29 245172 [AABCC280] -> osmtest_write_all_path_recs: ERR
0025:
> osmtest_get_all_recs failed (IB_REMOTE_ERROR)
> Jan 16 15:03:29 245194 [AABCC280] -> osmtest_run: ERR 00139: Inventory
file create
> failed (IB_REMOTE_ERROR)
> OSMTEST: TEST "Create Inventory" FAIL
> 
> 
> 
> On Tue, 2006-01-17 at 00:14 +0200, Eitan Zahavi wrote:
> > You might try using osmtest to see if the SM is returning all path
> > records:
> >
> > osmtest -f c
> > This should generate a file ./osmtest.dat with all path records
> >
> > See if you get any lines that start with PATH in that file.
> >
> > That is as far as I can help today (just about midnight here)
> >
> > Eitan Zahavi
> >
> > > -----Original Message-----
> > > From: openib-general-bounces at openib.org [mailto:openib-general-
> > > bounces at openib.org] On Behalf Of Ralph Campbell
> > > Sent: Tuesday, January 17, 2006 12:00 AM
> > > To: Eitan Zahavi
> > > Cc: openib-general at openib.org
> > > Subject: RE: [openib-general] SDP status?
> > >
> > > I can ping via IPoIB.  The SM/SA is running on the switch
> > > (I forget what manufacturer).
> > >
> > > On Mon, 2006-01-16 at 23:39 +0200, Eitan Zahavi wrote:
> > > > Do you have SM running on any node?
> > > > Can you ping to the other node by its ib0 IP address?
> > > >
> > > > Eitan Zahavi
> > > > >
> > > > > I tried getting the latest OpenIB tree from
> > > > > trunk/src/linux-kernel/infiniband with my 2.6.15 kernel.
> > > > > Everything seems to be working OK except that I can't
> > > > > establish a SDP connection. I get:
> > > > >
> > > > > ib_sdp WARN: <0> <2100> Path record completion error <-101>
> > > > >
> > > > > Any ideas what is happening?
> > > > >
> > > > > --
> > > > > Ralph Campbell <ralphc at pathscale.com>
> > > > >
> > > > > _______________________________________________
> > > > > openib-general mailing list
> > > > > openib-general at openib.org
> > > > > http://openib.org/mailman/listinfo/openib-general
> > > > >
> > > > > To unsubscribe, please visit
> > > > http://openib.org/mailman/listinfo/openib-general
> > > --
> > > Ralph Campbell <ralphc at pathscale.com>
> > >
> > > _______________________________________________
> > > openib-general mailing list
> > > openib-general at openib.org
> > > http://openib.org/mailman/listinfo/openib-general
> > >
> > > To unsubscribe, please visit
> > http://openib.org/mailman/listinfo/openib-general
> --
> Ralph Campbell <ralphc at pathscale.com>
>