[openib-general] [ucma] executing the ucmatose with local IPoIB IP address of port 2 fails

[Sean Hefty]

> scenario 2:  fails
>     SM was executed on port 2
>     i executed ucmatose server and ucmatose client with IPoIB IP address 
> of port 2
> 
> here is the output of the client:
> ucmatose: starting client
> ucmatose: connecting
> ucmatose: event: 3, error: 0
> receiving data transfers
> sending replies
> data transfers complete
> test complete
> return status 0

This is a ROUTE_ERROR (path record query fails).  Are the IP addresses on 
different subnets?  Are you having ucmatose bind to the port 2 ip address.

> It seems that when using the IPoIB IP address of port 2 in the client 
> side and there is an SM only on port 2 the test fails but if i add an SM 
> on port 1 the test passes.
> 
> Did you notice this behavior before?

I have not tested this configuration.

- Sean