[openib-general] libibcm can't connect/talk to libicm on other machine.

[Bub Thomas]

Dotan,
the ibv_rc_pingpong example works for me so I can exclude the
architecture.
I never got the libibcm example compiled.
Which is your example and which architecture x86 vs. x86_64 did you
compile it for?
Can you share your libibcm the example code? (if it is not the standard
that I can't get compiled)
Thomas

-----Original Message-----
From: openib-general-bounces at openib.org
[mailto:openib-general-bounces at openib.org] On Behalf Of Dotan Barak
Sent: Tuesday, September 05, 2006 5:12 PM
To: Bub Thomas
Cc: openib-general at openib.org
Subject: Re: [openib-general] libibcm can't connect/talk to libicm on
other machine.

Hi bub.


Bub Thomas wrote:
>
> I'm still in the process of migrating my gen1 application to gen2.
>
> Actually I CAN connect a gen2 application to a gen2 listener 
> application on the same machine but NOT to a gen 2 listener on another

> machine.
>
> Any hints where to look at?
>
> Is there anything in the architecture that might prevent a libibcm 
> connection to another machine?
>
> I'm using an old Voltaire switch to connect the machines. Can this be 
> the reason?
>
> The switch didn't cause problems using gen1 clients.
>
What is the problem that you see?
there are some examples that comes with the libibcm that can show you 
how to use the library.

there can be several reasons for your problem:
1) side A send a req when side B is not ready and there is a timeout
failure
2) only in side A the ib_ucm kernel module enabled
3) SM is not working (well)
4) host A cannot be reached to host B using IB
5) endianess issues?

i tried to use the libibcm and i don't have any problem (but i don't 
have any Voltaire switch, so i can't check your scenario).

Dotan

_______________________________________________
openib-general mailing list
openib-general at openib.org
http://openib.org/mailman/listinfo/openib-general

To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general