[ofa-general] RE: [ewg] RE: OFED 1.2 beta blocking bugs

Scott Weitzenkamp (sweitzen) sweitzen at cisco.com
Thu Mar 8 10:31:59 PST 2007


No standalone script, sorry.  But it's simple to automate with expect or
autoexpect using the switch CLI.

Scott 

> -----Original Message-----
> From: somenath [mailto:somenath at veritas.com] 
> Sent: Wednesday, March 07, 2007 10:27 AM
> To: Scott Weitzenkamp (sweitzen)
> Cc: Sean Hefty; Michael S. Tsirkin; Hefty, Sean; Pavel 
> Shamis; Openfabrics-ewg at openib.org; general at lists.openfabrics.org
> Subject: Re: [ewg] RE: OFED 1.2 beta blocking bugs
> 
> Scott:
> 
> do you have a  script to bring the cisco switch port up and down?
> 
> thanks,  som.
> 
> Scott Weitzenkamp (sweitzen) wrote:
> 
> >>I looked at the code, and didn't see anything obviously 
> >>wrong.  Can you tell me 
> >>how to reproduce the issue?  (I'm running 2.6.21-rc3.)
> >>    
> >>
> >
> >Use a recent OFED 1.2 build, say OFED-1.2-20070308-0708.
> >
> >Configure IPoIB HA to use ib0 and ib1, for example.  Make sure your
> >openibd.conf has these lines:
> >
> >IPOIB_LOAD=yes
> >SET_IPOIB_CM=yes
> >IPOIBHA_ENABLE=yes
> >PRIMARY_IPOIB_DEV=ib0
> >SECONDARY_IPOIB_DEV=ib1
> >
> >After running "/etc/init.d/openibd restart", start some IPoIB traffic
> >between the two hosts.
> >
> >Now start failing over IB ports, either by cable pulls or a 
> script that
> >takes switch ports up and down.  You should see the IP 
> address move back
> >and forth between ib0 and ib1, and error messages in dmesg.
> >
> >Scott
> >
> >_______________________________________________
> >ewg mailing list
> >ewg at lists.openfabrics.org
> >http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
> >  
> >
> 



More information about the general mailing list