[ofa-general] how do I use uDAPL with iWARP?

Joshua Bernstein jbernstein at penguincomputing.com
Wed Apr 2 16:04:53 PDT 2008


Scott,

On Apr 2, 2008, at 4:00 PM, Scott Weitzenkamp (sweitzen) wrote:
> I have OFED 1.3 and a Chelsio S310E-SR+ iWARP 10GE NIC.  I have  
> ib_rdma_lat working, so I know IB verbs are working.
>
> How do I use uDAPL, though?  All the default /etc/dat.conf entries  
> have IPoIB or bonding interfaces in them.

What you will want to do is edit /etc/ofed/dat64.conf or other  
related dat.conf file and change the name of the device from "ib0" to  
the name of the interface that the Chelsio card came up as. So for  
example with my NetXen cards coming up at eth2, so for example the  
first two lines of my /etc/ofed/dat64.conf file look like this:

OpenIB-cma u1.2 nonthreadsafe default /usr/lib64/libdaplcma.so dapl. 
1.2 "eth2 0" ""
#OpenIB-cma u1.2 nonthreadsafe default /usr/lib64/libdaplcma.so dapl. 
1.2 "ib0 0" ""

Notice how I've commented out the ib0 line and simply changed that to  
be eth2. Then you can use say HP-MPI for example using the -UDAPL  
option. Other MPI stacks have similar methods of telling them to use  
the UDAPL transport.

-Joshua Bernstein
Software Engineer
Penguin Computing



More information about the general mailing list