[ofa-general] Can't Initialize an MT23108 HCA

Mike Heinz michael.heinz at qlogic.com
Tue Apr 29 10:29:44 PDT 2008


Hey, Boris,
 
I am, indeed, running current firmware. I'll try to isolate variables
and see if I can focus on why this machine has a problem.
 
 
--
Michael Heinz
Principal Engineer, Qlogic Corporation
King of Prussia, Pennsylvania
 

________________________________

From: Boris Shpolyansky [mailto:boris at mellanox.com] 
Sent: Tuesday, April 29, 2008 12:42 PM
To: Mike Heinz; general at lists.openfabrics.org
Subject: RE: [ofa-general] Can't Initialize an MT23108 HCA


Hi Michael,
 
MT23108 HCAs are supported.
Please, update FW on your card to the latest version available from
Mellanox web site at
http://www.mellanox.com/support/firmware_table_IH.php
 
Follow FW burning instructions provided there.
 
Regards,
Boris Shpolyansky
Sr. Member of Technical Staff
Applications
Mellanox Technologies Inc.
2900 Stender Way
Santa Clara, CA 95054
Tel.: (408) 916 0014
Fax: (408) 970 3403
Cell: (408) 834 9365
www.mellanox.com
 
 

________________________________

From: general-bounces at lists.openfabrics.org
[mailto:general-bounces at lists.openfabrics.org] On Behalf Of Mike Heinz
Sent: Tuesday, April 29, 2008 9:38 AM
To: general at lists.openfabrics.org
Subject: [ofa-general] Can't Initialize an MT23108 HCA


I thought I'd posted this question on the group before, but looking
through my notes I couldn't find that I had. My apologies if this is a
repeat.
 
I installed OFED 1.3.0.0.4 on a system with an older, MT23108 HCA
running 3.05 firmware. The HCA is known to work with QuickSilver. When I
rebooted I got this:
 
Feb 18 13:06:02 newberry kernel: ib_mthca: Mellanox InfiniBand HCA
driver v0.08
(February 14, 2006)
Feb 18 13:06:02 newberry kernel: ib_mthca: Initializing 0000:04:00.0
Feb 18 13:06:02 newberry kernel: ACPI: PCI interrupt 0000:04:00.0[A] ->
GSI 28
(level, low) -> IRQ 217
Feb 18 13:06:02 newberry kernel: ib_mthca 0000:04:00.0: PCI device did
not come
back after reset, aborting.
Feb 18 13:06:02 newberry kernel: ib_mthca 0000:04:00.0: Failed to reset
HCA,
aborting.
The system is running RHEL4, update 4, x86_64. Are older HCAs supported
with OFED or can only Arbel and Connect-X type HCAs usable?
 
--
Michael Heinz
Principal Engineer, Qlogic Corporation
King of Prussia, Pennsylvania
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20080429/67e82d68/attachment.html>


More information about the general mailing list