[ofa-general] Re: OpenSM release notes and Connect-X

[Yevgeny Kliteynik]

Hal Rosenstock wrote:
> Yevgeny,
> 
> We should get Connect-X added into table 3 below copied from the opensm
> release notes:
> 
> Mellanox
> Device  |   FW versions
> --------|-----------------------------------------------------------
> MT43132 |   InfiniScale - fw-43132  5.2.0 (and later)
> MT47396 |   InfiniScale III - fw-47396 0.5.0 (and later)
> MT23108 |   InfiniHost - fw-23108   3.3.2 (and later)
> MT25204 |   InfiniHost III Lx - fw-25204  1.0.1i (and later)
> MT25208 |   InfiniHost III Ex (MemFree Mode) - fw-25218  5.0.1 (and later)
> MT25208 |   InfiniHost III Ex (InfiniHost Mode) - fw-25208  4.6.2 (and later)
> 
> What are the device number(s) ?
> Also, it was said that any firmware version would suffice but I've seen:
> 
> mlx4_core 0000:01:00.0: Installed FW has unsupported command interface revision 1.
> mlx4_core 0000:01:00.0: (Installed FW version is 2.0.123)
> mlx4_core 0000:01:00.0: This driver version supports only revisions 2 to 3.
> mlx4_core 0000:01:00.0: QUERY_FW command failed, aborting.

According to OFED release notes, it's ConnectX IB - fw-25408 Rev 2.3.000 (and later).
I'll check the device IDs and update the OSM release notes.

-- Yevgeny


> Thanks.
> 
> -- Hal
> 
>