[ofa-general] [PATCH 1/2] add default configuration files
Doron Shoham
dorons at Voltaire.COM
Thu Nov 6 01:24:26 PST 2008
add default configuration files:
opensm.conf
partitions.conf
qos-policy.conf
root-nodes.conf
Signed-off-by: Doron Shoham <dorons at voltaire.com>
---
opensm/scripts/opensm.conf | 331 ++++++++++++++++++++++++++++++++++++++++
opensm/scripts/partitions.conf | 100 ++++++++++++
opensm/scripts/qos-policy.conf | 2 +
opensm/scripts/root-nodes.conf | 3 +
4 files changed, 436 insertions(+), 0 deletions(-)
create mode 100644 opensm/scripts/opensm.conf
create mode 100644 opensm/scripts/partitions.conf
create mode 100644 opensm/scripts/qos-policy.conf
create mode 100644 opensm/scripts/root-nodes.conf
diff --git a/opensm/scripts/opensm.conf b/opensm/scripts/opensm.conf
new file mode 100644
index 0000000..89e4145
--- /dev/null
+++ b/opensm/scripts/opensm.conf
@@ -0,0 +1,331 @@
+#
+# DEVICE ATTRIBUTES OPTIONS
+#
+# The port GUID on which the OpenSM is running
+guid 0x0000000000000000
+
+# M_Key value sent to all ports qualifying all Set(PortInfo)
+m_key 0x0000000000000000
+
+# The lease period used for the M_Key on this subnet in [sec]
+m_key_lease_period 0
+
+# SM_Key value of the SM used for SM authentication
+sm_key 0x0000000000000001
+
+# SM_Key value to qualify rcv SA queries as 'trusted'
+sa_key 0x0000000000000001
+
+# Note that for both values above (sm_key and sa_key)
+# OpenSM version 3.2.1 and below used the default value '1'
+# in a host byte order, it is fixed now but you may need to
+# change the values to interoperate with old OpenSM running
+# on a little endian machine.
+
+# Subnet prefix used on this subnet
+subnet_prefix 0xfe80000000000000
+
+# The LMC value used on this subnet
+lmc 0
+
+# lmc_esp0 determines whether LMC value used on subnet is used for
+# enhanced switch port 0. If TRUE, LMC value for subnet is used for
+# ESP0. Otherwise, LMC value for ESP0s is 0.
+lmc_esp0 FALSE
+
+# The code of maximal time a packet can live in a switch
+# The actual time is 4.096usec * 2^<packet_life_time>
+# The value 0x14 disables this mechanism
+packet_life_time 0x12
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. The result of setting this value to
+# zero is undefined.
+vl_stall_count 0x07
+
+# The number of sequential packets dropped that cause the port
+# to enter the VLStalled state. This value is for switch ports
+# driving a CA or router port. The result of setting this value
+# to zero is undefined.
+leaf_vl_stall_count 0x07
+
+# The code of maximal time a packet can wait at the head of
+# transmission queue.
+# The actual time is 4.096usec * 2^<head_of_queue_lifetime>
+# The value 0x14 disables this mechanism
+head_of_queue_lifetime 0x12
+
+# The maximal time a packet can wait at the head of queue on
+# switch port connected to a CA or router port
+leaf_head_of_queue_lifetime 0x10
+
+# Limit the maximal operational VLs
+max_op_vls 5
+
+# Force PortInfo:LinkSpeedEnabled on switch ports
+# If 0, don't modify PortInfo:LinkSpeedEnabled on switch port
+# Otherwise, use value for PortInfo:LinkSpeedEnabled on switch port
+# Values are (IB Spec 1.2.1, 14.2.5.6 Table 146 "PortInfo")
+# 1: 2.5 Gbps
+# 3: 2.5 or 5.0 Gbps
+# 5: 2.5 or 10.0 Gbps
+# 7: 2.5 or 5.0 or 10.0 Gbps
+# 2,4,6,8-14 Reserved
+# Default 15: set to PortInfo:LinkSpeedSupported
+force_link_speed 15
+
+# The subnet_timeout code that will be set for all the ports
+# The actual timeout is 4.096usec * 2^<subnet_timeout>
+subnet_timeout 18
+
+# Threshold of local phy errors for sending Trap 129
+local_phy_errors_threshold 0x08
+
+# Threshold of credit overrun errors for sending Trap 130
+overrun_errors_threshold 0x08
+
+#
+# PARTITIONING OPTIONS
+#
+# Partition configuration file to be used
+partition_config_file /etc/opensm/partitions.conf
+
+# Disable partition enforcement by switches
+no_partition_enforcement FALSE
+
+#
+# SWEEP OPTIONS
+#
+# The number of seconds between subnet sweeps (0 disables it)
+sweep_interval 10
+
+# If TRUE cause all lids to be reassigned
+reassign_lids FALSE
+
+# If TRUE forces every sweep to be a heavy sweep
+force_heavy_sweep FALSE
+
+# If TRUE every trap will cause a heavy sweep.
+# NOTE: successive identical traps (>10) are suppressed
+sweep_on_trap TRUE
+
+#
+# ROUTING OPTIONS
+#
+# If TRUE count switches as link subscriptions
+port_profile_switch_nodes FALSE
+
+# Name of file with port guids to be ignored by port profiling
+port_prof_ignore_file (null)
+
+# Routing engine
+# Multiple routing engines can be specified separated by
+# commas so that specific ordering of routing algorithms will
+# be tried if earlier routing engines fail.
+# Supported engines: minhop, updn, file, ftree, lash, dor
+routing_engine minhop
+
+# Connect roots (use FALSE if unsure)
+connect_roots FALSE
+
+# Use unicast routing cache (use FALSE if unsure)
+use_ucast_cache FALSE
+
+# Lid matrix dump file name
+lid_matrix_dump_file (null)
+
+# LFTs file name
+lfts_file (null)
+
+# The file holding the root node guids (for fat-tree or Up/Down)
+# One guid in each line
+root_guid_file (null)
+
+# The file holding the fat-tree compute node guids
+# One guid in each line
+cn_guid_file (null)
+
+# The file holding the node ids which will be used by Up/Down algorithm instead
+# of GUIDs (one guid and id in each line)
+ids_guid_file (null)
+
+# The file holding guid routing order guids (for MinHop and Up/Down)
+guid_routing_order_file (null)
+
+# SA database file name
+sa_db_file (null)
+
+#
+# HANDOVER - MULTIPLE SMs OPTIONS
+#
+# SM priority used for deciding who is the master
+# Range goes from 0 (lowest priority) to 15 (highest).
+sm_priority 14
+
+# If TRUE other SMs on the subnet should be ignored
+ignore_other_sm FALSE
+
+# Timeout in [msec] between two polls of active master SM
+sminfo_polling_timeout 10000
+
+# Number of failing polls of remote SM that declares it dead
+polling_retry_number 4
+
+# If TRUE honor the guid2lid file when coming out of standby
+# state, if such file exists and is valid
+honor_guid2lid_file FALSE
+
+#
+# TIMING AND THREADING OPTIONS
+#
+# Maximum number of SMPs sent in parallel
+max_wire_smps 4
+
+# The maximum time in [msec] allowed for a transaction to complete
+transaction_timeout 200
+
+# Maximal time in [msec] a message can stay in the incoming message queue.
+# If there is more than one message in the queue and the last message
+# stayed in the queue more than this value, any SA request will be
+# immediately returned with a BUSY status.
+max_msg_fifo_timeout 10000
+
+# Use a single thread for handling SA queries
+single_thread FALSE
+
+#
+# MISC OPTIONS
+#
+# Daemon mode
+daemon FALSE
+
+# SM Inactive
+sm_inactive FALSE
+
+# Babbling Port Policy
+babbling_port_policy FALSE
+
+#
+# Performance Manager Options
+#
+# perfmgr enable
+perfmgr FALSE
+
+# perfmgr redirection enable
+perfmgr_redir TRUE
+
+# sweep time in seconds
+perfmgr_sweep_time_s 180
+
+# Max outstanding queries
+perfmgr_max_outstanding_queries 500
+
+#
+# Event DB Options
+#
+# Dump file to dump the events to
+event_db_dump_file (null)
+
+#
+# Event Plugin Options
+#
+event_plugin_name (null)
+
+#
+# Node name map for mapping node's to more descriptive node descriptions
+# (man ibnetdiscover for more information)
+#
+node_name_map_name (null)
+
+#
+# DEBUG FEATURES
+#
+# The log flags used
+log_flags 0x03
+
+# Force flush of the log file after each log message
+force_log_flush FALSE
+
+# Log file to be used
+log_file /var/log/opensm.log
+
+# Limit the size(MB) of the log file. If overrun, log is restarted
+log_max_size 4096
+
+# If TRUE will accumulate the log over multiple OpenSM sessions
+accum_log_file TRUE
+
+# The directory to hold the file OpenSM dumps
+dump_files_dir /var/log/
+
+# If TRUE enables new high risk options and hardware specific quirks
+enable_quirks FALSE
+
+# If TRUE disables client reregistration
+no_clients_rereg FALSE
+
+# If TRUE OpenSM should disable multicast support and
+# no multicast routing is performed if TRUE
+disable_multicast FALSE
+
+# If TRUE opensm will exit on fatal initialization issues
+exit_on_fatal TRUE
+
+# console [off|local]
+console off
+
+# Telnet port for console (default 10000)
+console_port 10000
+
+#
+# QoS OPTIONS
+#
+# Enable QoS setup
+qos FALSE
+
+# QoS policy file to be used
+qos_policy_file /etc/opensm/qos-policy.conf
+
+# QoS default options
+qos_max_vls 15
+qos_high_limit 0
+qos_vlarb_high 0:4,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0,9:0,10:0,11:0,12:0,13:0,14:0
+qos_vlarb_low 0:0,1:4,2:4,3:4,4:4,5:4,6:4,7:4,8:4,9:4,10:4,11:4,12:4,13:4,14:4
+qos_sl2vl 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,7
+
+# QoS CA options
+qos_ca_max_vls 15
+qos_ca_high_limit 0
+qos_ca_vlarb_high 0:4,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0,9:0,10:0,11:0,12:0,13:0,14:0
+qos_ca_vlarb_low 0:0,1:4,2:4,3:4,4:4,5:4,6:4,7:4,8:4,9:4,10:4,11:4,12:4,13:4,14:4
+qos_ca_sl2vl 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,7
+
+# QoS Switch Port 0 options
+qos_sw0_max_vls 15
+qos_sw0_high_limit 0
+qos_sw0_vlarb_high 0:4,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0,9:0,10:0,11:0,12:0,13:0,14:0
+qos_sw0_vlarb_low 0:0,1:4,2:4,3:4,4:4,5:4,6:4,7:4,8:4,9:4,10:4,11:4,12:4,13:4,14:4
+qos_sw0_sl2vl 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,7
+
+# QoS Switch external ports options
+qos_swe_max_vls 15
+qos_swe_high_limit 0
+qos_swe_vlarb_high 0:4,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0,9:0,10:0,11:0,12:0,13:0,14:0
+qos_swe_vlarb_low 0:0,1:4,2:4,3:4,4:4,5:4,6:4,7:4,8:4,9:4,10:4,11:4,12:4,13:4,14:4
+qos_swe_sl2vl 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,7
+
+# QoS Router ports options
+qos_rtr_max_vls 15
+qos_rtr_high_limit 0
+qos_rtr_vlarb_high 0:4,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0,9:0,10:0,11:0,12:0,13:0,14:0
+qos_rtr_vlarb_low 0:0,1:4,2:4,3:4,4:4,5:4,6:4,7:4,8:4,9:4,10:4,11:4,12:4,13:4,14:4
+qos_rtr_sl2vl 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,7
+
+# Prefix routes file name
+prefix_routes_file /etc/opensm/prefix-routes.conf
+
+#
+# IPv6 Solicited Node Multicast (SNM) Options
+#
+consolidate_ipv6_snm_req FALSE
+
diff --git a/opensm/scripts/partitions.conf b/opensm/scripts/partitions.conf
new file mode 100644
index 0000000..868a26a
--- /dev/null
+++ b/opensm/scripts/partitions.conf
@@ -0,0 +1,100 @@
+# Default partition configuration file for OpenSM
+#
+# The default name of OpenSM partitions configuration file is /etc/opensm/partitions.conf. The default may be changed by using --Pconfig (-P)
+# option with OpenSM.
+#
+# The default partition will be created by OpenSM unconditionally even when partition configuration file does not exist or cannot be accessed.
+#
+# The default partition has P_Key value 0x7fff. OpenSM´s port will have full membership in default partition. All other end ports will have par‐
+# tial membership.
+#
+# File Format
+#
+# Comments:
+#
+# Line content followed after ´#´ character is comment and ignored by parser.
+#
+# General file format:
+#
+# <Partition Definition>:<PortGUIDs list> ;
+#
+# Partition Definition:
+#
+# [PartitionName][=PKey][,flag[=value]][,defmember=full|limited]
+#
+# PartitionName - string, will be used with logging. When omitted
+# empty string will be used.
+# PKey - P_Key value for this partition. Only low 15 bits will
+# be used. When omitted will be autogenerated.
+# flag - used to indicate IPoIB capability of this partition.
+# defmember=full|limited - specifies default membership for port guid
+# list. Default is limited.
+#
+# Currently recognized flags are:
+#
+# ipoib - indicates that this partition may be used for IPoIB, as
+# result IPoIB capable MC group will be created.
+# rate=<val> - specifies rate for this IPoIB MC group
+# (default is 3 (10GBps))
+# mtu=<val> - specifies MTU for this IPoIB MC group
+# (default is 4 (2048))
+# sl=<val> - specifies SL for this IPoIB MC group
+# (default is 0)
+# scope=<val> - specifies scope for this IPoIB MC group
+# (default is 2 (link local)). Multiple scope settings
+# are permitted for a partition.
+#
+# Note that values for rate, mtu, and scope should be specified as defined in the IBTA specification (for example, mtu=4 for 2048).
+#
+# PortGUIDs list:
+#
+# PortGUID - GUID of partition member EndPort. Hexadecimal
+# numbers should start from 0x, decimal numbers
+# are accepted too.
+# full or limited - indicates full or limited membership for this
+# port. When omitted (or unrecognized) limited
+# membership is assumed.
+#
+# There are two useful keywords for PortGUID definition:
+#
+# - 'ALL' means all end ports in this subnet.
+# - 'SELF' means subnet manager's port.
+#
+# Empty list means no ports in this partition.
+#
+# Notes:
+#
+# White space is permitted between delimiters ('=', ',',':',';').
+#
+# The line can be wrapped after ':' followed after Partition Definition and between.
+#
+# PartitionName does not need to be unique, PKey does need to be unique. If PKey is repeated then those partition configurations will be merged
+# and first PartitionName will be used (see also next note).
+#
+# It is possible to split partition configuration in more than one definition, but then PKey should be explicitly specified (otherwise different
+# PKey values will be generated for those definitions).
+#
+# Examples:
+#
+# Default=0x7fff : ALL, SELF=full ;
+#
+# NewPartition , ipoib : 0x123456=full, 0x3456789034=limi, 0x2134af2306 ;
+#
+# YetAnotherOne = 0x300 : SELF=full ;
+# YetAnotherOne = 0x300 : ALL=limited ;
+#
+# ShareIO = 0x80 , defmember=full : 0x123451, 0x123452;
+# # 0x123453, 0x123454 will be limited
+# ShareIO = 0x80 : 0x123453, 0x123454, 0x123455=full;
+# # 0x123456, 0x123457 will be limited
+# ShareIO = 0x80 : defmember=limited : 0x123456, 0x123457, 0x123458=full;
+# ShareIO = 0x80 , defmember=full : 0x123459, 0x12345a;
+# ShareIO = 0x80 , defmember=full : 0x12345b, 0x12345c=limited, 0x12345d;
+#
+#
+# Note:
+#
+# The following rule is equivalent to how OpenSM used to run prior to the partition manager:
+#
+ Default=0x7fff,ipoib:ALL=full;
+#
diff --git a/opensm/scripts/qos-policy.conf b/opensm/scripts/qos-policy.conf
new file mode 100644
index 0000000..42a88c0
--- /dev/null
+++ b/opensm/scripts/qos-policy.conf
@@ -0,0 +1,2 @@
+# Default Quality of Service policy configuration file
+# For further details see /usr/share/doc/opensm-<version>/QoS_management_in_OpenSM.txt
diff --git a/opensm/scripts/root-nodes.conf b/opensm/scripts/root-nodes.conf
new file mode 100644
index 0000000..d84d732
--- /dev/null
+++ b/opensm/scripts/root-nodes.conf
@@ -0,0 +1,3 @@
+# Default root node GUIDs configuration file for OpenSM
+# List of GUIDs in hex, one per line
+# 0x8f10002322134567
--
1.5.3.8
More information about the general
mailing list