[ofa-general] Re: [PATCH v2] infiniband-diags/scripts: Add 'ibcheckspeed' and 'ibcheckportspeed' to scripts

[Hal Rosenstock]

On Thu, Sep 10, 2009 at 9:02 AM, Keshetti Mahesh
<keshetti.mahesh at gmail.com>wrote:

> Added 'ibcheckspeed' and 'ibcheckportspeed': Similar to
> 'ibcheckwidth/ibcheckportwidth' in functionality and implementation.
> Reports error/warning messages if the LinkSpeedActive is configured as
> 2.5 Gbps when the LinkSpeedSupported is more than 2.5 Gbps.
>

ibportstate checks for more than this in terms of speed (and width)
anomalies.

Would it be better for these scripts to use that tool now ? Alternatively,
the additional speed/width anomaly checks could be implemented in these
scripts but it does involve checking the peer port so there's a little more
to it.

-- Hal


>
> Signed-off-by: Keshetti Mahesh < keshetti.mahesh at gmail.com>
> ---
>  infiniband-diags/scripts/ibcheckportspeed.in |  146
> ++++++++++++++++++++++++++
>  infiniband-diags/scripts/ibcheckportwidth.in |    2 +-
>  infiniband-diags/scripts/ibcheckspeed.in     |  135
> ++++++++++++++++++++++++
>  3 files changed, 282 insertions(+), 1 deletions(-)
>  create mode 100644 infiniband-diags/scripts/ibcheckportspeed.in
>  create mode 100644 infiniband-diags/scripts/ibcheckspeed.in
>
<snip...>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20090910/4a64a95b/attachment.html>