<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2604" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>Hi Roland,</DIV>
<DIV> </DIV>
<DIV>I don't know about mstflint but I used flint in the past from IBGD so it
may be the same?</DIV>
<DIV>With flint, you need to use the raw image (bin) and not the Mellanox one
(mlx).</DIV>
<DIV>This is what I used:</DIV>
<DIV> </DIV>
<DIV>flint -d /dev/mst/mt23108_pci_cr2 -i
/etc/ibfw/fw/fw-cougar-a1-3.3.2-jerome.bin b<BR>Image type: FailSafe<BR>Chip
rev.: A1<BR>GUIDs: 0005ad0000016770
0005ad0000016771 0005ad0000016772 0005ad000100d050 <BR>Board ID:
</DIV>
<DIV> </DIV>
<DIV> Burn image with the following
GUIDs:<BR>
Node:
0005ad0000016770<BR>
Port1:
0005ad0000016771<BR>
Port2:
0005ad0000016772<BR> Sys.Image:
0005ad000100d050<BR>etc...</DIV>
<DIV> </DIV>
<DIV>I think that I created the bin image using infiniburn.</DIV>
<DIV>I read fw-23108-a1-rel.mlx using infiniburn and write the bin image (raw
format).</DIV>
<DIV>But if you have infiniburn working, I think that you can burn the mlx image
directly.</DIV>
<DIV> </DIV>
<DIV>Jerome</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>----- Original Message ----- </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=rf@q-leap.de href="mailto:rf@q-leap.de">Roland Fehrenbacher</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=openib-general@openib.org
href="mailto:openib-general@openib.org">openib-general@openib.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, April 07, 2005 5:38
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [openib-general] Flashing
Mellanox MT23108</DIV>
<DIV><BR></DIV>Hi,<BR><BR>can anyone tell me how to flash a Mellanox MT23108
card with<BR>mstflint. When I try the firmware file fw-23108-a1-rel.mlx
from<BR>Mellanox I get<BR><BR>$ mstflint -d /proc/bus/pci/03/00.0 -i
fw-23108-a1-rel.mlx b<BR>Not a valid
image<BR><BR>Roland<BR><BR>_______________________________________________<BR>openib-general
mailing list<BR><A
href="mailto:openib-general@openib.org">openib-general@openib.org</A><BR><A
href="http://openib.org/mailman/listinfo/openib-general">http://openib.org/mailman/listinfo/openib-general</A><BR><BR>To
unsubscribe, please visit <A
href="http://openib.org/mailman/listinfo/openib-general">http://openib.org/mailman/listinfo/openib-general</A></BLOCKQUOTE></BODY></HTML>