openfab2:~ # rping -s -vV -C100 -d -a 0.0.0.0 -p 9999
ipaddr (0.0.0.0)
port 9999
created cm_id 0x804e6e0
rdma_bind_addr successful
rdma_listen
cma_event type 4 cma_id 0x804e968 (child)
child cma 0x804e968
Segmentation fault

openfab:~ # rping -c -vV -C100 -d  -a 17.2.2.102 -p 9999
ipaddr (17.2.2.102)
port 9999
created cm_id 0x506b00
cma_event type 0 cma_id 0x506b00 (parent)
cma_event type 2 cma_id 0x506b00 (parent)
rdma_resolve_addr - rdma_resolve_route successful
created pd 0x506e60
created channel 0x506e80
created cq 0x506ea0
created qp 0x506f40
rping_setup_buffers called on cb 0x505010
allocated & registered buffers...
cq_thread started.


dmesg output from openfab2:
--------------------------
c2: AMSO1100 Gigabit Ethernet driver v1.1 loaded
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 24 (level, low) -> IRQ 193
eth0 renamed to eth3
krping_init
Virtual device iw0 asks to queue packet!
Virtual device iw0 asks to queue packet!
eth3: no IPv6 routers present
Virtual device iw0 asks to queue packet!
iw0: no IPv6 routers present

dmesg output from openfab:
--------------------------
c2: AMSO1100 Gigabit Ethernet driver v1.1 loaded
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 28 (level, low) -> IRQ 185
krping_init
Virtual device iw1 asks to queue packet!
Virtual device iw1 asks to queue packet!
eth1: no IPv6 routers present
Virtual device iw1 asks to queue packet!
iw1: no IPv6 routers present