Improve man page readability.

Signed-off-by: Philippe Gregoire <philippe.gregoire@cea.fr>


--- old/opensm.8	2007-05-15 17:25:06.524992759 +0200
+++ new1/opensm.8	2007-05-15 15:52:09.000000000 +0200
@@ -316,10 +316,12 @@
 
 PortGUIDs list:
 
-PortGUID     - GUID of partition member EndPort. Hexadecimal numbers
-               should start from 0x, decimal numbers are accepted too.
-full or      - indicates full or limited membership for this port. When
-  limited      omitted (or unrecognized) limited membership is assumed.
+ PortGUID         - GUID of partition member EndPort. Hexadecimal 
+                    numbers should start from 0x, decimal numbers 
+                    are accepted too.
+ full or limited  - indicates full or limited membership for this 
+                    port.  When omitted (or unrecognized) limited 
+                    membership is assumed.
 
 There are two useful keywords for PortGUID definition:
 
@@ -345,19 +347,19 @@
 
 Examples:
 
-Default=0x7fff : ALL, SELF=full ;
+ Default=0x7fff : ALL, SELF=full ;
 
-NewPartition , ipoib : 0x123456=full, 0x3456789034=limi, 0x2134af2306 ;
+ NewPartition , ipoib : 0x123456=full, 0x3456789034=limi, 0x2134af2306 ;
 
-YetAnotherOne = 0x300 : SELF=full ;
-YetAnotherOne = 0x300 : ALL=limited ;
+ YetAnotherOne = 0x300 : SELF=full ;
+ YetAnotherOne = 0x300 : ALL=limited ;
 
 Note:
 
 The following rule is equivalent to how OpenSM used to run prior to the
 partition manager:
 
-Default=0x7fff,ipoib:ALL=full;
+ Default=0x7fff,ipoib:ALL=full;
 
 .SH QOS CONFIGURATION
 .PP
