SD Stress
---------
Format the DUT and remember the drive letter
sdstress.exe /s:C /p:100 /d:32 /t:4 /za /b:6
                /s is the drive letter, /d is the queue depth, /b is the transfer size

SCSI Compliance 2.0
-------------------
(note: do not run on boot drive, will fail)
Open a command prompt as Administrator (else an error will be received about opening the device)
scsicompliance.exe /device \\.\PhysicalDrive1 /verbosity 1 /logoprogram StorCont /scenario unittest
(note: On QEMU, 14 tests were failed in the baseline of a SATA drive, See)

PCMark 7
--------
Format the DUT and remember the drive letter
Install PCMark 7
Launch PCMark 7
Upgrade installation using a license key
Uncheck the standard PCMark 7 suite
Check the Secondary storage suite and use drive letter of DUT

IOMeter
-------
Format the DUT and remember the drive letter
Install iometer-2006.07.27.win32.i386-setup.exe
Launch IOMeter
Open BASICSMO.ICF
Assign Disk Target for worker1 the drive letter assigned
Click the green flag to start the test