\Program Files\WinOF>osmtest

Command Line Arguments
Done with args
        Flow = All Validations

Choose a local port number with which to bind:

        1: GUID = 0x66a00a0004512, lid = 0x003D, state = DOWN
        2: GUID = 0x66a01a0004512, lid = 0x003E, state = ACTIVE

Enter choice (1-2): 2

[17:13:04:031][1154] -> osm_vendor_bind: Binding to port 0x66a01a0004512.
[17:13:04:031][1154] -> osm_vendor_bind: ERR 3B21: Unable to register QP0 MAD service (IB_INSUFFICIENT_MEMORY).
[17:13:04:031][1154] -> osmv_bind_sa: ERR 0506: Fail to bind to vendor SMI.
[17:13:04:031][1154] -> osmtest_bind: ERR 0137: Unable to bind to SA

***********************************earlier vstat******************************************
\Program Files\WinOF>vstat -v | more

      hca_idx=0
      uplink={BUS=PCI_X, CAPS=133 MHz}
      vendor_id=0x066a
      vendor_part_id=0x5a44
      hw_ver=0xa1
      fw_ver=0x300030003
      node_guid=0006:6a00:9800:4512
      num_phys_ports = 2
      max_num_qp = 0xfc00             (Maximum Number of QPs supported)
      max_qp_ous_wr = 0xffff          (Maximum Number of outstanding WR on any WQ)
      max_num_sg_ent = 0x1c           (Max num of scatter/gather entries for WQE other than RD)
      max_num_sg_ent_rd = 0x0         (Max num of scatter/gather entries for RD WQE)
      max_num_srq = 0x3f0             (Maximum Number of SRQs supported)
      max_wqe_per_srq = 0xffff        (Maximum Number of outstanding WR on any SRQ)
      max_srq_sentries = 0x1c         (Maximum Number of scatter/gather entries for SRQ WQE)
      srq_resize_supported = 0        (SRQ resize supported)
      max_num_cq = 0xff80             (Max num of supported CQs)
      max_num_ent_cq = 0x1ffff        (Max num of supported entries per CQ)
      max_num_mr = 0x1fff0            (Maximum number of memory region supported)
      max_mr_size = 0xffffffff        (Largest contiguous block of memory region in bytes)
      max_pd_num = 0x8000             (Maximum number of protection domains supported)
      page_size_cap = 0x1000          (Largest page size supported by this HCA)
      local_ca_ack_delay = 0xf        (Log2 4.096usec Max. RX to ACK or NAK delay)
      max_qp_ous_rd_atom = 0x4        (Maximum number of oust. RDMA read/atomic as target)
      max_ee_ous_rd_atom = 0          (EE Maximum number of outs. RDMA read/atomic as target)
      max_res_rd_atom = 0x0           (Max. Num. of resources used for RDMA read/atomic as target)
      max_qp_init_rd_atom = 0x80      (Max. Num. of outs. RDMA read/atomic as initiator)
      max_ee_init_rd_atom = 0         (EE Max. Num. of outs. RDMA read/atomic as initiator)
      atomic_cap = LOCAL              (Level of Atomicity supported)
      max_ee_num = 0x0                (Maximum number of EEC supported)
      max_rdd_num = 0x0               (Maximum number of IB_RDD supported)
      max_mw_num = 0x0                (Maximum Number of memory windows supported)
      max_raw_ipv6_qp = 0x0           (Maximum number of Raw IPV6 QPs supported)
      max_raw_ethy_qp = 0x0           (Maximum number of Raw Ethertypes QPs supported)
      max_mcast_grp_num = 0x2000      (Maximum Number of multicast groups)
      max_mcast_qp_attach_num = 0x8   (Maximum number of QP per multicast group)
      max_ah_num = 0x0                (Maximum number of address handles)
      max_num_fmr = 0x0               (Maximum number FMRs)
      max_num_map_per_fmr = 0x7fff    (Maximum number of (re)maps per FMR before an unmap operation in required)
              port=1
              port_state=PORT_DOWN (1)
              link_speed=2.5Gbps (1)
              link_width=4x (2)
              rate=10
              sm_lid=0x0001
              port_lid=0x003d
              port_lmc=0x0
              max_mtu=2048 (4)
              max_msg_sz=0x80000000   (Max message size)
              capabilities: VENDOR_CLASS,TRAP,APM,SL_MAP,LED_INFO,CLIENT_REG,SYSGUID,
              max_vl_num=0x0          (Maximum number of VL supported by this port)
              bad_pkey_counter=0x0    (Bad PKey counter)
              qkey_viol_counter=0x0   (QKey violation counter)
              sm_sl=0x0               (IB_SL to be used in communication with subnet manager)
              pkey_tbl_len=0x40       (Current size of pkey table)
              gid_tbl_len=0x20        (Current size of GID table)
              subnet_timeout=0x11     (Subnet Timeout for this port (see PortInfo))
              initTypeReply=0x0       (optional InitTypeReply value. 0 if not supported)
              GID[0]=fe80:0000:0000:0000:0006:6a00:a000:4512

              port=2
              port_state=PORT_ACTIVE (4)
              link_speed=2.5Gbps (1)
              link_width=4x (2)
              rate=10
              sm_lid=0x0001
              port_lid=0x003e
              port_lmc=0x0
              max_mtu=2048 (4)
              max_msg_sz=0x80000000   (Max message size)
              capabilities: VENDOR_CLASS,TRAP,APM,SL_MAP,LED_INFO,CLIENT_REG,SYSGUID,
              max_vl_num=0x0          (Maximum number of VL supported by this port)
              bad_pkey_counter=0x0    (Bad PKey counter)
              qkey_viol_counter=0x0   (QKey violation counter)
              sm_sl=0x0               (IB_SL to be used in communication with subnet manager)
              pkey_tbl_len=0x40       (Current size of pkey table)
              gid_tbl_len=0x20        (Current size of GID table)
              subnet_timeout=0x11     (Subnet Timeout for this port (see PortInfo))
              initTypeReply=0x0       (optional InitTypeReply value. 0 if not supported)
              GID[0]=fe80:0000:0000:0000:0006:6a01:a000:4512