[Wwg] Install_SRP Err(2)

[Cameron Harr]

Alex, that worked. I'm a little embarrassed I didn't get that on my own 
- I had earlier wanted to install the driver manually, but all I had was 
a .msi installer and no correct drivers in windows\system32. I didn't 
realize it dumped the files elsewhere.
Thanks again,
Cameron

Alex Estrin wrote:
> Hi Cameron,
>
> IBA\V00066AP00000038 is a device ID for QLogic FC gateway, not for OFED SRP Target.
> Looks like this is Installer issue.
> As a temp. workaround you could try install srp driver manually through Dev Manager HW update Wizard:
> Right click mouse->Update Driver -> Select "Not this time" -> select "install from specific location" and point to <WinOF-install_dir>\SRP.
> (by default it should be in "C:\Program Files (x86)\WinOF\SRP" for x64 platforms ).
> I hope this will help.
>
> Thanks,
> Alex.
>
>
>
>   
>> -----Original Message-----
>> From: wwg-bounces at lists.openfabrics.org 
>> [mailto:wwg-bounces at lists.openfabrics.org] On Behalf Of Cameron Harr
>> Sent: Monday, December 15, 2008 5:42 PM
>> To: wwg at lists.openfabrics.org
>> Subject: [Wwg] Install_SRP Err(2) 
>>
>> I just installed a new win2003 server (64b) install and have been 
>> trying, unsuccessfully, to get SRP working. Every time I've tried the 
>> install, I get the following error:
>> "Install_SRP Err(2) devman update ib_srp.inf 
>> IBA\V00066AP00000038" and 
>> then the installer proceeds to the "Finish" screen. Other 
>> parts of the 
>> SRP install seem to work fine, and Windows detects a 
>> "Mellanox OFED SRP 
>> Target" in the Device Manager, but can't find a driver for it.
>>
>> Looking through the release notes, I saw that there is a necessary 
>> hotfix from MS. I installed the two hotfixes associated with 
>> the issue, 
>> have rebooted numerous times, and still get the error. Any ideas?
>> Thanks,
>> Cameron
>> _______________________________________________
>> wwg mailing list
>> wwg at lists.openfabrics.org
>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/wwg
>>