[openfabrics-ewg] SDP issue with IBED RC3

[Sharma, Karun]

Hi
 
Yes, netserver was restarted with libsdp. I didn't get any error there.
I face same issue even if i use the default config (libsdp.conf) . Netserver was started using default libsdp.conf.
For netperf, initially i used default libsdp.conf file but when it didn't worked i changed it as mentioned in my previous mail.
 
Attached below is the output from netserver machine.
 
Thanks
Karun
 
#################################################################
[st44 Tue Apr 11 15:21:38]# export LD_LIBRARY=/usr/local/ibed/lib/libsdp.so
[st44 Tue Apr 11 15:21:59]# export LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netserver
[st44 Tue Apr 11 15:22:30]# netserver
Starting netserver at port 12865
Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
[st44 Tue Apr 11 15:22:33]#
####################################################################

-----Original Message-----
From: Scott Weitzenkamp (sweitzen) [mailto:sweitzen at cisco.com]
Sent: Tuesday, April 11, 2006 5:07 PM
To: Sharma, Karun; openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


Did you restart netserver w/libsdp, too?
 
What happens when you use libsdp.so with the default libsdp.conf config?
 
Scott


  _____  

From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
Sent: Tuesday, April 11, 2006 2:05 PM
To: openfabrics-ewg at openib.org
Subject: [openfabrics-ewg] SDP issue with IBED RC3



Hi: 

I am trying to measure SDP throughput using netperf. But as soon as i enable SDP for netperf, my netperf is not able to establish a connection. In my libsdp.conf file, i have included following

match destination 172.26.16.44/24 
match listen * 
match program * 

Please let me know if i missed out something. 

Attached below is the output. Initially without SDP, netperf was working fine. Then I enabled sdp and after that my netperf doesn't work.

Thanks 
Karun 

################################################## 
[st45 Tue Apr 11 15:46:03]# netperf -H 172.26.16.44 
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 172.26.16.44 (172.26.16 
Recv   Send    Send 
Socket Socket  Message  Elapsed 
Size   Size    Size     Time     Throughput 
bytes  bytes   bytes    secs.    10^6bits/sec 

 87380  16384  16384    10.00    1137.17 
[st45 Tue Apr 11 15:46:17]# vi /usr/local/ibed/etc/libsdp.conf 
[st45 Tue Apr 11 15:52:25]# export LD_PRELOAD=/usr/local/ibed/lib/libsdp.so 
[st45 Tue Apr 11 15:52:58]# export LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netperf 
[st45 Tue Apr 11 15:53:33]# netperf -H 172.26.16.44 
establish control: are you sure there is a netserver listening on 172.26.16.44 at port 12865? 
establish_control could not establish the control connection from 0.0.0.0 port 0 address family AF_UNSPEC to 172.26.16.44 port 12865 address family AF_UNSPEC

[st45 Tue Apr 11 15:53:42]# 

####################################################### 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060411/83063f74/attachment.html>