[openfabrics-ewg] [PATCH] ehca backport linux_hvcall_to_2_6_9.patch
Hoang-Nam Nguyen
hnguyen at de.ibm.com
Mon Sep 18 09:50:31 PDT 2006
Hi,
below is hvcall patch, which is required in order to compile/build ehca
device driver on kernel 2.6.9, ppc64.
I did commit it into svn contrib/ibm/gen2/backport/2.6.9.
Thanks!
Nam Nguyen
Signed-off-by Hoang-Nam Nguyen <hnguyen at de.ibm.com>
---
hvcall.h | 228 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 228 insertions(+)
diff -Nurp linux-2.6.9_orig/drivers/infiniband/include/asm/hvcall.h linux-2.6.9_work/drivers/infiniband/include/asm/hvcall.h
--- linux-2.6.9_orig/drivers/infiniband/include/asm/hvcall.h 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.9_work/drivers/infiniband/include/asm/hvcall.h 2006-09-18 04:43:45.892980696 -0700
@@ -0,0 +1,228 @@
+#ifndef ASM_HVCALL_BACKPORT_269_H
+#define ASM_HVCALL_BACKPORT_269_H
+
+#include_next <asm/hvcall.h>
+
+#define H_SUCCESS H_Success
+#define H_BUSY H_Busy
+#define H_CONSTRAINED H_Constrained
+#define H_PAGE_REGISTERED 15
+
+#define H_PARAMETER H_Parameter
+#define H_NO_MEM H_NoMem
+#define H_RESOURCE H_Resource
+#define H_HARDWARE H_Hardware
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RT_PARM -22
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ALIAS_EXIST -39
+#define H_TABLE_FULL -41
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+
+#define H_CB_ALIGNMENT 4096
+
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_QUERY_INT_STATE 0x1E4
+
+#define H_LONG_BUSY_ORDER_1_MSEC H_LongBusyOrder1msec
+#define H_LONG_BUSY_ORDER_10_MSEC H_LongBusyOrder10msec
+#define H_LONG_BUSY_ORDER_100_MSEC H_LongBusyOrder100msec
+#define H_LONG_BUSY_ORDER_1_SEC H_LongBusyOrder1sec
+#define H_LONG_BUSY_ORDER_10_SEC H_LongBusyOrder10sec
+#define H_LONG_BUSY_ORDER_100_SEC H_LongBusyOrder100sec
+#define H_IS_LONG_BUSY(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+inline static long plpar_hcall_7arg_7ret(unsigned long opcode,
+ unsigned long arg1, /* <R4 */
+ unsigned long arg2, /* <R5 */
+ unsigned long arg3, /* <R6 */
+ unsigned long arg4, /* <R7 */
+ unsigned long arg5, /* <R8 */
+ unsigned long arg6, /* <R9 */
+ unsigned long arg7, /* <R10 */
+ unsigned long *out1, /* <R4 */
+ unsigned long *out2, /* <R5 */
+ unsigned long *out3, /* <R6 */
+ unsigned long *out4, /* <R7 */
+ unsigned long *out5, /* <R8 */
+ unsigned long *out6, /* <R9 */
+ unsigned long *out7 /* <R10 */
+ )
+{
+ unsigned long regs[11] = {opcode,
+ arg1, arg2, arg3, arg4, arg5, arg6, arg7};
+
+ __asm__ __volatile__("mr 3,%10\n"
+ "mr 4,%11\n"
+ "mr 5,%12\n"
+ "mr 6,%13\n"
+ "mr 7,%14\n"
+ "mr 8,%15\n"
+ "mr 9,%16\n"
+ "mr 10,%17\n"
+ "mr 11,%18\n"
+ "mr 12,%19\n"
+ ".long 0x44000022\n"
+ "mr %0,3\n"
+ "mr %1,4\n"
+ "mr %2,5\n"
+ "mr %3,6\n"
+ "mr %4,7\n"
+ "mr %5,8\n"
+ "mr %6,9\n"
+ "mr %7,10\n"
+ "mr %8,11\n"
+ "mr %9,12\n":"=r"(regs[0]),
+ "=r"(regs[1]), "=r"(regs[2]),
+ "=r"(regs[3]), "=r"(regs[4]),
+ "=r"(regs[5]), "=r"(regs[6]),
+ "=r"(regs[7]), "=r"(regs[8]),
+ "=r"(regs[9])
+ :"r"(regs[0]), "r"(regs[1]),
+ "r"(regs[2]), "r"(regs[3]),
+ "r"(regs[4]), "r"(regs[5]),
+ "r"(regs[6]), "r"(regs[7]),
+ "r"(regs[8]), "r"(regs[9])
+ :"r0", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "cc",
+ "xer", "ctr", "lr", "cr0", "cr1", "cr5",
+ "cr6", "cr7");
+ *out1 = regs[1];
+ *out2 = regs[2];
+ *out3 = regs[3];
+ *out4 = regs[4];
+ *out5 = regs[5];
+ *out6 = regs[6];
+ *out7 = regs[7];
+
+ if (!H_isLongBusy(regs[0]) && regs[0] < 0) {
+ printk(KERN_ERR "HCALL77_IN r3=%lx r4=%lx r5=%lx r6=%lx "
+ "r7=%lx r8=%lx r9=%lx r10=%lx",
+ opcode, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ printk(KERN_ERR "HCALL77_OUT r3=%lx r4=%lx r5=%lx "
+ "r6=%lx r7=%lx r8=%lx r9=%lx r10=%lx ",
+ regs[0], regs[1],
+ regs[2], regs[3],
+ regs[4], regs[5],
+ regs[6], regs[7]);
+ }
+ return regs[0];
+}
+
+inline static long plpar_hcall_9arg_9ret(unsigned long opcode,
+ unsigned long arg1, /* <R4 */
+ unsigned long arg2, /* <R5 */
+ unsigned long arg3, /* <R6 */
+ unsigned long arg4, /* <R7 */
+ unsigned long arg5, /* <R8 */
+ unsigned long arg6, /* <R9 */
+ unsigned long arg7, /* <R10 */
+ unsigned long arg8, /* <R11 */
+ unsigned long arg9, /* <R12 */
+ unsigned long *out1, /* <R4 */
+ unsigned long *out2, /* <R5 */
+ unsigned long *out3, /* <R6 */
+ unsigned long *out4, /* <R7 */
+ unsigned long *out5, /* <R8 */
+ unsigned long *out6, /* <R9 */
+ unsigned long *out7, /* <R10 */
+ unsigned long *out8, /* <R11 */
+ unsigned long *out9 /* <R12 */
+ )
+{
+ unsigned long regs[11] = {opcode,
+ arg1, arg2, arg3, arg4, arg5, arg6, arg7,
+ arg8, arg9};
+
+ __asm__ __volatile__("mr 3,%10\n"
+ "mr 4,%11\n"
+ "mr 5,%12\n"
+ "mr 6,%13\n"
+ "mr 7,%14\n"
+ "mr 8,%15\n"
+ "mr 9,%16\n"
+ "mr 10,%17\n"
+ "mr 11,%18\n"
+ "mr 12,%19\n"
+ ".long 0x44000022\n"
+ "mr %0,3\n"
+ "mr %1,4\n"
+ "mr %2,5\n"
+ "mr %3,6\n"
+ "mr %4,7\n"
+ "mr %5,8\n"
+ "mr %6,9\n"
+ "mr %7,10\n"
+ "mr %8,11\n"
+ "mr %9,12\n":"=r"(regs[0]),
+ "=r"(regs[1]), "=r"(regs[2]),
+ "=r"(regs[3]), "=r"(regs[4]),
+ "=r"(regs[5]), "=r"(regs[6]),
+ "=r"(regs[7]), "=r"(regs[8]),
+ "=r"(regs[9])
+ :"r"(regs[0]), "r"(regs[1]),
+ "r"(regs[2]), "r"(regs[3]),
+ "r"(regs[4]), "r"(regs[5]),
+ "r"(regs[6]), "r"(regs[7]),
+ "r"(regs[8]), "r"(regs[9])
+ :"r0", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "cc",
+ "xer", "ctr", "lr", "cr0", "cr1", "cr5",
+ "cr6", "cr7");
+ *out1 = regs[1];
+ *out2 = regs[2];
+ *out3 = regs[3];
+ *out4 = regs[4];
+ *out5 = regs[5];
+ *out6 = regs[6];
+ *out7 = regs[7];
+ *out8 = regs[8];
+ *out9 = regs[9];
+
+ if (!H_isLongBusy(regs[0]) && regs[0] < 0) {
+ printk(KERN_ERR "HCALL99_IN r3=%lx r4=%lx r5=%lx r6=%lx "
+ "r7=%lx r8=%lx r9=%lx r10=%lx "
+ "r11=%lx r12=%lx",
+ opcode, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7,
+ arg8, arg9);
+ printk(KERN_ERR "HCALL99_OUT r3=%lx r4=%lx r5=%lx "
+ "r6=%lx r7=%lx r8=%lx r9=%lx r10=%lx "
+ "r11=%lx r12=lx",
+ regs[0], regs[1],
+ regs[2], regs[3],
+ regs[4], regs[5],
+ regs[6], regs[7],
+ regs[8]);
+ }
+ return regs[0];
+}
+#endif
+
+#endif
More information about the ewg
mailing list