[openfabrics-ewg] FW: Mstflint - not working on ppc64 andwhendriver is not loaded on AMD
Moshe Kazir
moshek at voltaire.com
Thu Sep 28 02:00:10 PDT 2006
I prefer the "mstflint -d 0c:00.0 q " format
As in enables the writing of script that extract lscpi info and getting
results ->
# mstflint -d `lspci | grep Mellanox |grep -v Bridge | cut -f1 -d" "` q
Image type: Failsafe
I.S. Version: 1
Chip Revision: A0
GUID Des: Node Port1 Port2 Sys
image
GUIDs: 0008f1040398047c 0008f1040398047d 0008f1040398047e
0008f1040398047f
Board ID: (0TLV00700003)
VSD:
PSID: 0TLV00700003
#
The format "mstflint -d mtch0 " is good but no sufficient .
When the HCA is old/wrong/damaged insmod may fail. In this case we'll
need mstflint to fix problems.
Me must have a way to operate mstflint when driver is not loaded.
> When mthca is loaded, what does
> mstflint -d /sys/class/infiniband/mthca0/device/resource0 q
> do on PPC?
On PPC64 sles10 with Franks last fix
# ./mstflint -d /sys/class/infiniband/mthca0/device/resource0 q
*** ERROR *** Can not open
/sys/class/infiniband/mthca0/device/resource0: Invalid argument
*** ERROR *** Can not get flash type using device
/sys/class/infiniband/mthca0/device/resource0
#
On PPC64 with OFED-1.1 rc6 original sources
# ./mstflint -d /sys/class/infiniband/mthca0/device/resource0 q
*** ERROR *** Can not open
/sys/class/infiniband/mthca0/device/resource0: Invalid argument
*** ERROR *** Can not get flash type using device
/sys/class/infiniband/mthca0/device/resource0
#
Moshe
____________________________________________________________
Moshe Katzir | +972-9971-8639 (o) | +972-52-860-6042 (m)
Voltaire - The Grid Backbone
www.voltaire.com
-----Original Message-----
From: Michael S. Tsirkin [mailto:mst at mellanox.co.il]
Sent: Thursday, September 28, 2006 9:35 AM
To: Moshe Kazir
Cc: Tseng-Hui (Frank) Lin; openfabrics-ewg at openib.org;
openib-general at openib.org
Subject: Re: FW: Mstflint - not working on ppc64 andwhendriver is not
loaded on AMD
Quoting r. Moshe Kazir <moshek at voltaire.com>:
> The mstflint operated in the "classic way" in OFED-1.1 is not working
> on PPC64 sles10 !!!
I consider the classic way to be
-d /sys/class/infiniband/mthca0/device/resource0
It does seem a bit verbse now that you mention this - would
a shortcut to allow just -d mthca0 help a lot?
--
MST
More information about the ewg
mailing list