[ewg] RE: [ofa-general] Re: [Interop-wg] [RFP] support for iWARP requirement -active connect side MUST send first FPDU

[Kanevsky, Arkady]

Bill,
we need to go wider then uDAPL.
The right folks to ask are UNH folks who run interop event.
Thanks,
 

Arkady Kanevsky                       email: arkady at netapp.com

Network Appliance Inc.               phone: 781-768-5395

1601 Trapelo Rd. - Suite 16.        Fax: 781-895-1195

Waltham, MA 02451                   central phone: 781-768-5300

 


________________________________

	From: Bill Boas [mailto:bill.boas at gmail.com] 
	Sent: Wednesday, October 24, 2007 12:40 AM
	To: Arlin Davis
	Cc: xwg at lists.openfabrics.org; ewg at lists.openfabrics.org;
OpenFabrics General; interop-wg at lists.openfabrics.org
	Subject: [ofa-general] Re: [Interop-wg] [RFP] support for iWARP
requirement -active connect side MUST send first FPDU
	
	
	All involved with iWARP and OFED contribution and maintenance
	
	Before the developer's session in Reno about iWARP, could you as
a team working together prepare a complete list of the iWARP technical
issues that confront everyone and the differences that you have with
each other in the current state of the implementation and diffrences you
have about resolving future isses you already have a sense of. 
	
	And publish that list before SC  with the options for
resolutions that have been pit forward so far. Arlin are you willing to
take the lead on accomplishing this?
	
	Is that a reasonable request so we can all understand and help
with the resolutions, if possible? 
	
	Bill.
	
	
	On 10/23/07, Arlin Davis <ardavis at ichips.intel.com> wrote: 


		There has been much discussion on a private thread
regarding bug #735 -
		"dapltest performance tests don't adhere to iWARP
standard" that needs
		to move to the general list.
		
		iWARP, has a requirement that the active side of the
connection MUST be 
		the first to send the first FPDU (SEND or RDMA
operation). This presents
		a problem with applications written for uDAPL and OFA
verbs given that
		there is no such restriction. So, short of requiring
every OFA
		application/ULP to adhere to this restriction, we need
the iWARP vendors 
		to come up with a standard method to remove the
restriction.
		
		Can someone come up with a solution, possibly in iWARP
CM, that will
		work and insure interoperability between iWARP devices?
		
		
		-arlin
		
		
		
		
		
		
		
		_______________________________________________
		Interop-wg mailing list
		Interop-wg at lists.openfabrics.org
	
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/interop-wg
		


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20071024/e965f44d/attachment.html>