[ewg] Re: [Stgt-devel] Update (Re: open iSCSI over iSER target RPM ...)

[Joe Landman]

FUJITA Tomonori wrote:

> Can you try the latest git tree
> (65a3f8b0c14305aaee5bcaade569b40882e8dd88)? It works for me:
> 
> scsi3 : iSCSI Initiator over TCP/IP
> scsi 3:0:0:0: RAID              IET      Controller       0001 PQ: 0 ANSI: 5
> scsi 3:0:0:1: Direct-Access     IET      VIRTUAL-DISK     0001 PQ: 0 ANSI: 5
> sd 3:0:0:1: [sdb] Very big device. Trying to use READ CAPACITY(16).
> sd 3:0:0:1: [sdb] 12884901888 512-byte hardware sectors (6597070 MB)
> sd 3:0:0:1: [sdb] Write Protect is off
> sd 3:0:0:1: [sdb] Mode Sense: 79 00 00 08
> sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> 
> 
> Somehow I forgot to add READ_CAPACITY_16 support. I would appreciate
> it if you could read and write on over 2TB position properly.

Ok, I will pull it a little later today, build and let you know.


-- 
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics LLC,
email: landman at scalableinformatics.com
web  : http://www.scalableinformatics.com
        http://jackrabbit.scalableinformatics.com
phone: +1 734 786 8423
fax  : +1 866 888 3112
cell : +1 734 612 4615