[ewg] OpenSM from ofed-1.2 and ofed-1.3 clients
Steve Wise
swise at opengridcomputing.com
Tue Jun 3 09:19:04 PDT 2008
Hello opensm gurus:
Sandia is seeing problems after migrating up to ofed-1.3. They are
still using an ofed-1.2 opensm but with ofed-1.3 clients, updated from
ofed-1.2.5.
They are getting the errors below.
Q: should this work? Or are the backwards compat issues?
Thanks,
Steve.
log:
> May 23 08:29:22 408613 [45007960] -> __osm_sm_mad_ctrl_send_err_cb:
> ERR 3113: MAD completed in error (IB_TIMEOUT)
> May 23 08:29:22 408622 [45007960] -> __osm_sm_mad_ctrl_send_err_cb:
> ERR 3119: Set method failed
> May 23 08:29:22 408652 [45007960] -> SMP dump:
> base_ver................0x1
> mgmt_class..............0x81
> class_ver...............0x1
> method..................0x2 (SubnSet)
> D bit...................0x0
> status..................0x0
> hop_ptr.................0x0
> hop_count...............0x3
> trans_id................0x1694a4
> attr_id.................0x1B
> (MulticastForwardingTable)
> resv....................0x0
> attr_mod................0x10000000
> m_key...................0x0000000000000000
> dr_slid.................0xFFFF
> dr_dlid.................0xFFFF
>
> Initial path: 0,1,14,9
> Return path: 0,0,0,0
> Reserved: [0][0][0][0][0][0][0]
>
> 00 40 00 40 00 00 00 40 00 00 00 00
> 00 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
>
> May 23 08:29:22 408689 [45007960] -> umad_receiver: ERR 5409: send
> completed with error (method=0x2 attr=0x1B trans_id=0x14001694a5) --
> dropping
> May 23 08:29:22 408699 [45007960] -> umad_receiver: ERR 5411: DR SMP
> Hop Ptr: 0x0
> May 23 08:29:22 408711 [45007960] -> Received SMP on a 3 hop path:
> Initial path = 0,0,0,0
> Return path = 0,0,0,0
> May 23 08:29:22 408721 [45007960] -> __osm_sm_mad_ctrl_send_err_cb:
> ERR 3113: MAD completed in error (IB_TIMEOUT)
> May 23 08:29:22 408729 [45007960] -> __osm_sm_mad_ctrl_send_err_cb:
> ERR 3119: Set method failed
> May 23 08:29:22 408759 [45007960] -> SMP dump:
> base_ver................0x1
> mgmt_class..............0x81
> class_ver...............0x1
> method..................0x2 (SubnSet)
> D bit...................0x0
> status..................0x0
> hop_ptr.................0x0
> hop_count...............0x3
> trans_id................0x1694a5
> attr_id.................0x1B
> (MulticastForwardingTable)
> resv....................0x0
> attr_mod................0x1
> m_key...................0x0000000000000000
> dr_slid.................0xFFFF
> dr_dlid.................0xFFFF
>
> Initial path: 0,1,14,9
> Return path: 0,0,0,0
> Reserved: [0][0][0][0][0][0][0]
>
> 00 00 00 00 00 00 00 20 00 00 00 00
> 00 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 04 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
>
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 10
>
> May 23 08:29:22 412432 [42803960] -> Errors during initialization
> May 23 08:29:22 412508 [42803960] -> __osm_state_mgr_init_errors_msg:
More information about the ewg
mailing list