[ewg] RE: OFED-1.4.1-rc3, Mvapich2 build error with the Intel compiler

[Woodruff, Robert J]

Seems to me specific to mvapich2. 
If I select Intel compiler for mvapich or openmpi, those
seem to compile, but mvapich2 fails. 

woody
 

-----Original Message-----
From: Jonathan Perkins [mailto:perkinjo at cse.ohio-state.edu] 
Sent: Friday, April 10, 2009 5:49 AM
To: Woodruff, Robert J
Cc: ewg at lists.openfabrics.org; Jeff Squyres
Subject: Re: OFED-1.4.1-rc3, Mvapich2 build error with the Intel compiler

On Thu, Apr 09, 2009 at 04:31:01PM -0700, Woodruff, Robert J wrote:
>  
> Hi Jonathan,
> 
> I was trying to build mvapich2 using the Intel compiler
> option of the OFED-1.4.1 install script and I get the
> following build error.  It seems to work fine for 
> mvapich and openmpi, but mvapich2 fails.

Thanks for the report.  I'll try to reproduce this but we haven't made
any changes since the 1.4 release.  Can you provide the config.log file
as well?

> 
> Also, it I get build errors if I try to 
> compile any of the MPI tests with the Intel compiler.

Is this specific to mvapich2 or, as you seem to say, any of the
libraries?

> 
> 
> woody
> 
> 
> + ./configure --prefix=/usr/mpi/intel/mvapich2-1.2p1 --with-rdma=gen2 --with-ib-include=/usr/include --with-ib-libpath=/usr/lib64 --enable-sharedlibs=gcc 'CC=icc -i-dynamic' 'CXX=icpc -i-dynamic' 'F77=ifort -i-dynamic' 'F90=ifort -i-dynamic'
> Configuring MVAPICH2 1.2.0p1 with  '--prefix=/usr/mpi/intel/mvapich2-1.2p1' '--with-rdma=gen2' '--with-ib-include=/usr/include' '--with-ib-libpath=/usr/lib64' '--enable-sharedlibs=gcc' 'CC=icc -i-dynamic' 'CXX=icpc -i-dynamic' 'F77=ifort -i-dynamic' 'F90=ifort -i-dynamic'
> checking build system type... x86_64-unknown-linux-gnu
> Executing mpich2prereq in /var/tmp/OFED_topdir/BUILD/mvapich2-1.2p1/src/mpid/ch3 with
> Executing mpich2prereq in /var/tmp/OFED_topdir/BUILD/mvapich2-1.2p1/src/mpid/ch3/channels/mrail
> sourcing /var/tmp/OFED_topdir/BUILD/mvapich2-1.2p1/src/pm/mpd/mpich2prereq
> sourcing /var/tmp/OFED_topdir/BUILD/mvapich2-1.2p1/src/pm/mpd/setup_pm
> checking for gcc... icc -i-dynamic
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... configure: error: cannot run C compiled programs.
> If you meant to cross compile, use `--host'.
> See `config.log' for more details.
> error: Bad exit status from /var/tmp/rpm-tmp.45421 (%build)
> 
> 
> RPM build errors:
>     user jperkins does not exist - using root
>     group jperkins does not exist - using root
>     user jperkins does not exist - using root
>     group jperkins does not exist - using root
>     Bad exit status from /var/tmp/rpm-tmp.45421 (%build)

-- 
Jonathan Perkins
http://www.cse.ohio-state.edu/~perkinjo