[ewg] OpenSM problem on today's OFED-1.5.1 daily build

[Hal Rosenstock]

On Fri, Feb 19, 2010 at 6:02 PM, Woodruff, Robert J
<robert.j.woodruff at intel.com> wrote:
>
> I have 2 systems that have Mellanox dual port connectx
> cards with one of the ports connected to a and SDR switch
> and the other port direct connected.
>
> With today's OFED-1.5.1 daily build, the OpenSM does
> not seem to transition the port all the way up.
> If I use OFED-1.5.1-rc1, it works fine.

Has there been any change between those two in the management space ?

>
> [root at woody-10 woody]# /etc/init.d/opensmd start
> Starting IB Subnet Manager.                                [  OK  ]

Based on the below, I'm presuming OpenSM runs on port 1.

> [root at woody-10 woody]# /usr/sbin/ibstat
> CA 'mlx4_0'
>        CA type: MT26428
>        Number of ports: 2
>        Firmware version: 2.7.0
>        Hardware version: a0
>        Node GUID: 0x0002c90300044fa8
>        System image GUID: 0x0002c90300044fab
>        Port 1:
>                State: Armed
>                Physical state: LinkUp
>                Rate: 10
>                Base lid: 1
>                LMC: 0
>                SM lid: 1
>                Capability mask: 0x0251086a
>                Port GUID: 0x0002c90300044fa9

What state is the peer port in ? Any interesting OpenSM log messages ?

-- Hal

>        Port 2:
>                State: Initializing
>                Physical state: LinkUp
>                Rate: 40
>                Base lid: 0
>                LMC: 0
>                SM lid: 0
>                Capability mask: 0x02510868
>                Port GUID: 0x0002c90300044faa
> [root at woody-10 woody]#