[ewg] OFED-1.5.1 failure over iWarp
Woodruff, Robert J
robert.j.woodruff at intel.com
Thu Jan 21 10:30:50 PST 2010
On the server side, if I do not specify an address,
the server starts
[woody at det-17 src]$
[woody at det-17 src]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:23:AF:8E:CE
inet addr:192.168.0.17 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::204:23ff:feaf:8ece/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1544 errors:0 dropped:0 overruns:0 frame:0
TX packets:991 errors:0 dropped:0 overruns:0 carrier:0
collisions:41 txqueuelen:100
RX bytes:360766 (352.3 KiB) TX bytes:131310 (128.2 KiB)
Base address:0xdc00 Memory:f9fa0000-f9fc0000
eth1 Link encap:Ethernet HWaddr 00:04:23:AF:8E:CF
inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xdc80 Memory:f9fe0000-fa000000
eth2 Link encap:Ethernet HWaddr 00:12:55:02:AE:CC
inet addr:192.168.2.17 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::212:55ff:fe02:aecc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34136 errors:0 dropped:0 overruns:0 frame:0
TX packets:35012 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2863188 (2.7 MiB) TX bytes:2907831 (2.7 MiB)
Interrupt:169
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:930 errors:0 dropped:0 overruns:0 frame:0
TX packets:930 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:70925 (69.2 KiB) TX bytes:70925 (69.2 KiB)
[woody at det-17 src]$
[woody at det-17 src]$
[woody at det-17 src]$ ucmatose
cmatose: starting server
But on the client, it fails on any of the ip addresses,
but differently on 192.168.1.17.
ucmatose -s 192.168.0.17
cmatose: starting client
cmatose: connecting
cmatose: event: RDMA_CM_EVENT_ADDR_ERROR, error: -2
receiving data transfers
sending replies
data transfers complete
test complete
return status 0
ucmatose -s 192.168.1.17
cmatose: starting client
cmatose: connecting
cmatose: event: RDMA_CM_EVENT_ADDR_ERROR, error: -110
receiving data transfers
sending replies
data transfers complete
test complete
return status 0
ucmatose -s 192.168.2.17
cmatose: starting client
cmatose: connecting
cmatose: event: RDMA_CM_EVENT_ADDR_ERROR, error: -2
receiving data transfers
sending replies
data transfers complete
test complete
return status 0
[woody at det-16 ~]$
-----Original Message-----
From: Hefty, Sean
Sent: Wednesday, January 20, 2010 9:30 PM
To: Woodruff, Robert J; tziporet at dev.mellanox.co.il; Tung, Chien Tin; Davis, Arlin R
Cc: OpenFabrics EWG; Steve Wise; Eli Cohen; Vladimir Sokolovsky
Subject: RE: [ewg] OFED-1.5.1 failure over iWarp
>[woody at det-16 ~]$ ucmatose -s 192.168.2.17
>cmatose: starting client
Btw - this should be 'ucmatose -s 192.168.0.17', and needs to start
after the server is running. But, this isn't going to work since...
>[woody at det-17 src]$ ifconfig eth0
>eth0 Link encap:Ethernet HWaddr 00:04:23:AF:8E:CE
> inet addr:192.168.0.17 Bcast:192.168.0.255
>Mask:255.255.255.0
> inet6 addr: fe80::204:23ff:feaf:8ece/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1272 errors:0 dropped:0 overruns:0 frame:0
> TX packets:909 errors:0 dropped:0 overruns:0 carrier:0
> collisions:41 txqueuelen:100
> RX bytes:309724 (302.4 KiB) TX bytes:123706 (120.8 KiB)
> Base address:0xdc00 Memory:f9fa0000-f9fc0000
>
>[woody at det-17 src]$ ucmatose -b 192.168.0.17
>cmatose: starting server
>cmatose: bind address failed: No such file or directory
the server is failing.
Can anyone test ucmatose over iwarp on the latest kernel.org kernel?
- Sean
More information about the ewg
mailing list