[ewg] iWarp - Failed to modify RC QP to RTS
ren yufei
renyufei83 at yahoo.com.cn
Thu Apr 21 15:39:17 PDT 2011
Hi,
Two hosts connected through both IB and iWarp.
1 'ib_write_bw' success via IB connection, while failure via iWarp connection.
2 Both clinet and server export 'Failed to modify RC QP to RTS' failure.
2.1 client errno: 22(Invalid argument)
2.2 server errno: 22(Invalid argument)
3 'rping' works via both IB and iWarp.
Any suggestion?
Connection
==
client device <====> server device
IB mlx4_1 mlx4_0 (addr IB)
iWarp nes0 nes0 (addr iWarp)
iWarp failure
==
server# ib_write_bw -d nes0
client# ib_write_bw [addr iWarp] -d nes0
------------------------------------------------------------------
RDMA_Write BW Test
Number of qp's running 1
Connection type : RC
Each Qp will post up to 100 messages each time
Inline data is used up to 0 bytes message
Link type is ETH
Using gid index 0 as source GID
local address: LID 0x01 QPN 0x0062 PSN 0xf2d446 RKey 0x104e6416 VAddr 0x002b699d075000
GID: 00:18:85:02:248:04:00:00:00:00:00:00:00:00:00:00
remote address: LID 0x01 QPN 0x0277 PSN 0xbc7dd7 RKey 0x60f7b956 VAddr 0x002b6ff84f3000
GID: 00:18:85:02:248:136:00:00:00:00:00:00:00:00:00:00
Failed to modify RC QP to RTS
Unable to Connect the HCA's through the link
IB success
==
'ib_write_bw' via IB
server# ib_write_bw -d mlx4_0
client# ib_write_bw [addr IB] -d mlx4_1
------------------------------------------------------------------
RDMA_Write BW Test
Number of qp's running 1
Connection type : RC
Each Qp will post up to 100 messages each time
Inline data is used up to 0 bytes message
Link type is ETH
Using gid index 0 as source GID
local address: LID 0000 QPN 0x30004e PSN 0x90ea46 RKey 0x10002a0f VAddr 0x002b3ceb0e9000
GID: 254:128:00:00:00:00:00:00:02:02:201:255:254:08:254:218
remote address: LID 0000 QPN 0x18004e PSN 0x29c2f2 RKey 0x58002af9 VAddr 0x002b841d5ce000
GID: 254:128:00:00:00:00:00:00:02:02:201:255:254:08:254:212
Mtu : 1024
------------------------------------------------------------------
#bytes #iterations BW peak[MB/sec] BW average[MB/sec]
Conflicting CPU frequency values detected: 2793.000000 != 1596.000000
65536 5000 0.00 0.00
------------------------------------------------------------------
ibv_devinfo
==
client:
hca_id: mlx4_1
transport: InfiniBand (0)
fw_ver: 2.7.854
node_guid: ffff:ffff:ffff:ffff
sys_image_guid: ffff:ffff:ffff:ffff
vendor_id: 0x02c9
vendor_part_id: 26478
hw_ver: 0xB0
board_id: MT_0D80110017
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 2048 (4)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: Ethernet
hca_id: nes0
transport: iWARP (1)
fw_ver: 3.16
node_guid: 0012:5502:f804:0000
sys_image_guid: 0012:5502:f804:0000
vendor_id: 0x1255
vendor_part_id: 256
hw_ver: 0x5
board_id: NES020 Board ID
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 1
port_lmc: 0x00
link_layer: Ethernet
server
hca_id: mlx4_0
transport: InfiniBand (0)
fw_ver: 2.7.854
node_guid: ffff:ffff:ffff:ffff
sys_image_guid: ffff:ffff:ffff:ffff
vendor_id: 0x02c9
vendor_part_id: 26478
hw_ver: 0xB0
board_id: MT_0D80110017
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 2048 (4)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
hca_id: nes0
transport: iWARP (1)
fw_ver: 3.16
node_guid: 0012:5502:f888:0000
sys_image_guid: 0012:5502:f888:0000
vendor_id: 0x1255
vendor_part_id: 256
hw_ver: 0x5
board_id: NES020 Board ID
phys_port_cnt: 1
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 1
port_lmc: 0x00
Thanks.
Yufei
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20110422/cbce8b90/attachment.html>
More information about the ewg
mailing list