[ewg] Mellanox IB/10Gige Card

[Jagga Soorma]

Okay, thanks.

-J

On Tue, Feb 15, 2011 at 8:10 PM, Gilad Shainer <Shainer at mellanox.com> wrote:

> You may want to check with support at mellanox.com.
>
>
>
> Gilad
>
>
>
>
>
> *From:* ewg-bounces at lists.openfabrics.org [mailto:
> ewg-bounces at lists.openfabrics.org] *On Behalf Of *Jagga Soorma
> *Sent:* Tuesday, February 15, 2011 8:07 PM
> *To:* ewg at lists.openfabrics.org
> *Subject:* [ewg] Mellanox IB/10Gige Card
>
>
>
> Hi Guys,
>
> I have a server that is supposed to have a QDR port and a port that is
> supposed to be a 10Gbe port.  When I run ibstatus, the 10Gbe port seems to
> be disabled.  Is there a way to enable this port?
>
> --
> [root at node01 ~]# ibstatus
> Infiniband device 'mlx4_0' port 1 status:
>         default gid:     fe80:0000:0000:0000:78e7:d103:0021:887d
>         base lid:        0x12
>         sm lid:          0x1
>         state:           4: ACTIVE
>         phys state:      5: LinkUp
>         rate:            40 Gb/sec (4X QDR)
>         link_layer:      IB
>
> Infiniband device 'mlx4_0' port 2 status:
>         default gid:     fe80:0000:0000:0000:7ae7:d1ff:fe21:887d
>         base lid:        0x0
>         sm lid:          0x0
>         state:           1: DOWN
>         phys state:      3: Disabled
>         rate:            40 Gb/sec (4X QDR)
>         link_layer:      Ethernet
> --
>
> Should I be using ibportstate to enable this port 2?  Any help would be
> greatly appreciated.  I have the mellanox ofed installed on this server.
>
> Thanks,
> -J
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20110215/d4fdb216/attachment.html>