[ewg] Patch breaks OFED 1.5.3: [PATCH] ibdiagpath: Properly index VlArbTable during QoS test

[Yevgeny Kliteynik]

Mike,

This looks like a different tcl versions/implementation issue.

I certainly can replace "$i+1" with "[expr $i+1]", but I'm not
sure about reverting the patch.

John,

What tcl version have you used?

-- YK



On 07-Feb-11 6:44 PM, Mike Heinz wrote:
> The version of  ibdiagpath included with OFED 1.5.3-rc3 contains syntax errors which prevent it from executing on the systems I've tested (using TCL 8.4).  Attempts to use ibdiagpath fail with an error message:
> 
>> -I---------------------------------------------------
>> -I- QoS on Path Check
>> -I---------------------------------------------------
>> bad index "0+1": must be integer or end?-integer?
> 
> After doing some research and debugging, I traced the problem to a patch applied back in October:
> 
> commit f3cf1f7c15ca24598fdf68b9ba71788b386b2f14
> Author: John Jolly<jjolly at novell.com>
> Date:   Wed Oct 6 17:29:48 2010 +0200
> 
>      ibdiagpath: Properly index VlArbTable during QoS test
> 
>      Description: ibdiagpath: Properly index VlArbTable during QoS test
>      Symptom:     Error 'invalid bareword "vl_entry"' during "QoS on
>                   Path Check"
>      Problem:     The 'dump' command within the smVlArbTableMad command
>                   appends '-vl_entry' to the beginning of the array.
>                   The ibdebug.tcl script does not properly handle this
>                   extra element at the beginning of the array.
>      Solution:    Offset the index value by one when referencing the
>                   array.
> 
>      Signed-off-by: John Jolly<jjolly at novell.com>
>      Signed-off-by: Yevgeny Kliteynik<kliteyn at dev.mellanox.co.il>
> 
> Unfortunately, this patch isn't valid TCL code (at least not in TCL 8.4) and does not appear to be needed at all.
> 
> For example:
> 
>> set entry [lindex $values $i+1]
> 
> Is not syntactically correct TCL.  In order for it to be correct it would have to be
> 
>> set entry [lindex $values [expr $i+1]]
> 
> However, the patch does not appear to be needed at all. Reverting the patch, allows ibdiagpath to complete successfully:
> 
>> -I---------------------------------------------------
>> -I- QoS on Path Check
>> -I---------------------------------------------------
>> -W- Blocked VLs:3 4 5 at node:homer lid=0x0002 guid=0x00066a00a000707f dev=25208>  port:1
>> -W- SLs:3 4 5 6 7 8 9 10 11 12 13 14 15 are blocked due to VLArb node:homer
>>      lid=0x0002 guid=0x00066a00a000707f dev=25208 in-port:0 out-port:1
>> -W- Blocked VLs:3 4 5 at node: lid=0x0001 guid=0x00066a00d9000275 dev=47396
>>      port:21
>> -W- SLs:3 4 5 6 7 8 9 10 11 12 13 14 15 mapped to VL>  5 at node: lid=0x0001
>>      guid=0x00066a00d9000275 dev=47396 in-port:14 out-port:21
>> -I- The following SLs can be used:0 1 2
> 
> This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>