[ewg] OFED 3.2 - Errors with admin-rdma script and make on x86

[Daniel A. Vega]

Got it!  Thanks!

# ibv_devinfo
hca_id: mlx4_0
         transport:                      InfiniBand (0)
         fw_ver:                         2.9.1000
         node_guid:                      0002:c903:004c:e6e2
         sys_image_guid:                 0002:c903:004c:e6e5
         vendor_id:                      0x02c9
         vendor_part_id:                 26428
         hw_ver:                         0xB0
         board_id:                       IBM0D80000009
         phys_port_cnt:                  2
                 port:   1
                         state:                  PORT_DOWN (1)
                         max_mtu:                2048 (4)
                         active_mtu:             2048 (4)
                         sm_lid:                 0
                         port_lid:               0
                         port_lmc:               0x00
                         link_layer:             InfiniBand

                 port:   2
                         state:                  PORT_DOWN (1)
                         max_mtu:                2048 (4)
                         active_mtu:             2048 (4)
                         sm_lid:                 0
                         port_lid:               0
                         port_lmc:               0x00
                         link_layer:             InfiniBand


On 3/20/2012 11:26 AM, Vladimir Sokolovsky wrote:
> On 03/20/2012 05:43 PM, Daniel A. Vega wrote:
>> Hi Vladimir
>> Got farther by removing the .backports_applied file.
>> I'm getting this directory error however.
>>
>> /bin/ls: cannot access 
>> /lib/modules/3.0.13-0.27-default/build/include/*/kconfig.h: No such 
>> file or directory
>> /bin/ls: cannot access 
>> /lib/modules/3.0.13-0.27-default/build/include/*/kconfig.h: No such 
>> file or directory
>
>
> Hi Daniel,
> You can ignore this error. It does not affect the compilation and I'll 
> fix it shortly.
> Please remove "--with-cxgb4-mod" from the configure parameters in 
> order to pass the compilation.
> cxgb4 is not supported yet.
>
> Regards,
> Vladimir 


-- 
Daniel A. Vega
Dept. 7UEA/7T IBM LTC RDMA Fabrics Development
Ely, MN 55731
Phone: 218-235-0977
Email: dvega at linux.vnet.ibm.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20120320/8d489a09/attachment.html>