[ewg] Support for MT27600, 15b3:1011

[pavan tc]

On Tue, Apr 9, 2013 at 4:09 PM, Rupert Dance <rsdance at soft-forge.com> wrote:

> Pavan,****
>
> ** **
>
> Currently the Mellanox ConnectIB card is only supported by Mellanox OFED.*
> ***
>

Thanks Rupert. Will try that out.

Pavan


> ** **
>
> Thanks****
>
> ** **
>
> Rupert Dance****
>
> Chair OFA IWG****
>
> Software Forge ****
>
> 2 Greenleaf Woods Drive #301****
>
> Portsmouth, NH 03801****
>
> Phone: 603-319-8486****
>
> www.soft-forge.com****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* ewg-bounces at lists.openfabrics.org [mailto:
> ewg-bounces at lists.openfabrics.org] *On Behalf Of *pavan tc
> *Sent:* Tuesday, April 09, 2013 6:49 PM
> *To:* ewg at lists.openfabrics.org
> *Subject:* [ewg] Support for MT27600, 15b3:1011****
>
> ** **
>
> Hi,****
>
> Please reply to my mail ID since I am not part of the ewg mailing list.***
> *
>
>
> I have a few mellanox cards with me with vendor ID:Device ID - 15b3:1011**
> **
>
> These belong to the MT27600 (Connect-IB) family. For so long, I was using
> OFED 1.5.3.1 on my systems, but it looks like the drivers do not support
> these
> cards. I even tried 1.5.4.1, and the card goes undetected with that too.**
> **
>
> What version of OFED supports this hardware? I went through the release
> notes
> of 1.5.3/1.5.4/3.2/3.5 but none of them list Connect-IB explicitly in the
> supported****
>
> HCA list.****
>
> Would greatly appreciate information on the above.****
>
> TIA,
> Pavan****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20130409/9b2967d1/attachment.html>