[ewg] OpenSM 3.3.16 will not start

[Mads Boye]

Sorry i forgot a thing.
This is the output i get when i try to run opensm

mb at munchkin1:~$ sudo /usr/local/sbin/opensm
[sudo] password for mb:
-------------------------------------------------
OpenSM 3.3.16
Command Line Arguments:
 Log File: /var/log/opensm.log
-------------------------------------------------
/usr/local/sbin/opensm: relocation error: /usr/local/sbin/opensm: symbol osm_log_v2, version OPENSM_1.5 not defined in file libopensm.so.5 with link time reference

Thank you.

Mads Boye
HPC & VMware Administrator  |  Information Service Technology

Phone: (+45) 9940 3453  | Email:mb at ist.aau.dk |  Webhomes.ist.aau.dk/mb/
Aalborg University | Selma Lagerløfs Vej 300 - 4.2.46 | Aalborg East |

________________________________________
Fra: ewg-bounces at lists.openfabrics.org [ewg-bounces at lists.openfabrics.org] på vegne af Mads Boye [mb at its.aau.dk]
Sendt: 12. april 2013 08:25
Til: ewg at lists.openfabrics.org
Emne: [ewg] OpenSM 3.3.16 will not start

Hi.

I'm trying to configure OFED in our cluster, and therefore have been installing openSM from source.
In the INSTALL it says to start openSM from /usr/local/sbin/opensm and if this fails send an email with /var/log/opensm.log so i hope this is the right mailing list, otherwise I'm sorry and hope that you can point me to the proper list.

Our worker nodes PXE boots from an image on a local administration machine. OpenSM has been compiled and installed into this image directly with no errors durring ./configure , make , or make install.

I've rebooted the node.

OFED is also installed directly in the image without any installation errors. openibd starts correctly at boot.

Hope that you are able to help me.

Please let me know if you need further information.

Best Regards

Mads Boye.