[openib-general] osm

[Hal Rosenstock]

On Thu, 2004-12-23 at 16:10, Tom Duffy wrote:
> How is a port supposed to be active without an SM running?

The instructions weren't quite in the right order. I think the README
file I added earlier has this right:

opensm will run on the first existing port.
You can override that by using "-g <portguid_in_hex>". 
Verify that the first port is active.

> I am getting:
> 
> [root at flopteron2 bin]# ./opensm -V
> -------------------------------------------------
> OpenSM Rev:1.6.0-rc2
> Command Line Arguments:
>  Big V selected
>  Log File: /tmp/osm.log
> -------------------------------------------------
> using default guid 0x2c9010a99e031
> return umad_open_port -5
> return umad_port_id -5
> 
> Error from osm_opensm_bind (0x2A)

I think the reason for this has been answered.

> [root at flopteron2 bin]# ./ibstat
> CA 'mthca0':
>         CA type: MT25208 (MT23108 coma0
>         Numer of ports: 2
>         Firmware version: 4.5.3
>         Hardware version: a0
>         Node GUID: 0x0002c9010a99e030
>         System image GUID: 0x0002c9010a99e033
>         Port 1:
>                 State: Down
>                 Base lid: 0
>                 LMC: 0
>                 SM lid: 0
>                 Capability mask: 0x00500a68
>                 Port GUID: 0x0002c9010a99e031
>         Port 2:
>                 State: Down
>                 Base lid: 0
>                 LMC: 0
>                 SM lid: 0
>                 Capability mask: 0x00500a68
>                 Port GUID: 0x0002c9010a99e032

Is port 1 plugged into anything ? It should get to INIT without the help
of a SM.

-- Hal