[openib-general] tvflash HCA numbering with multiple HCAs

Hal Rosenstock halr at voltaire.com
Fri Dec 31 09:56:28 PST 2004


Hi,

Has flashing HCAs when there are multiple HCAs in the host been tried ?
There seems to be some confusion on the HCA numbering in tvflash as
shown by the GUIDs below. I needed to tvflash -h 1 to update mthca0.

-- Hal

tvflash -v /home/mellanox/fw-23108-a1-rel.bin
New Node  GUID = 005442b100004900
New Port1 GUID = 005442b100004901
New Port2 GUID = 005442b100004902
Programming HCA Microcode... Flash Image Size = 342956
Erasing   
[==================================================================]
Writing   
[==================================================================]
Verifying 
[==================================================================]
Flash verify passed!

CA 'mthca0':
        CA type: MT23108
        Numer of ports: 2
        Firmware version: 3.0.0
        Hardware version: a1
        Node GUID: 0x0008f10403961354
        System image GUID: 0x0008f10403961357



More information about the general mailing list