[openib-general] [PATCH] Enable inet6 on ib interface
Roland Dreier
roland at topspin.com
Thu Nov 11 13:09:17 PST 2004
By the way, can anyone explain the following to me (an IPv6 rookie):
# ping6 -I ib0 fe80::202:c901:78c:e461
PING fe80::202:c901:78c:e461(fe80::202:c901:78c:e461) from fe80::202:c901:7fc:c711 ib0: 56 data bytes
64 bytes from fe80::202:c901:78c:e461: icmp_seq=1 ttl=64 time=32.2 ms
64 bytes from fe80::202:c901:78c:e461: icmp_seq=2 ttl=64 time=14.7 ms
64 bytes from fe80::202:c901:78c:e461: icmp_seq=3 ttl=64 time=14.6 ms
--- fe80::202:c901:78c:e461 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 14.682/20.557/32.274/8.286 ms
# ping6 fe80::202:c901:78c:e461
connect: Invalid argument
# ssh -6 fe80::202:c901:78c:e461
ssh: connect to host fe80::202:c901:78c:e461 port 22: Invalid argument
ssh works fine if I assign non-autoconfig'ed addresses.
Ethernet behaves the same way so I don't think it's something to do
with the IPoIB driver, but I would like to understand it better (if
only for my own edification).
Thanks,
Roland
More information about the general
mailing list