[openib-general] [PATCH] Enable inet6 on ib interface

[Tom Duffy]

On Thu, 2004-11-11 at 12:13 -0800, Roland Dreier wrote:
> OK, with the patch below all the correct IPv6 groups seem to be
> created and used.  Ping works at least...

With the updated patch (and with Nitin's original patch), when I bring
up ipv6, I am not getting the correct link local address.  I can assign
it a global address and ping just fine, but the lower 64 bits of the
IPv6 address are NULL (except for the set link local 2 (mentioned
earlier)):

ib0.8001  Link encap:UNSPEC  HWaddr 00-01-00-14-00-00-00-00-00-00-00-00-00-00-00-00
          inet6 addr: 2222::2/64 Scope:Global
          inet6 addr: fe80::200:0:0:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:2044  Metric:1
          RX packets:15 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:128
          RX bytes:1512 (1.4 Kb)  TX bytes:1752 (1.7 Kb)

Any ideas?

-tduffy

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20041111/0eb53051/attachment.sig>